Acl Vlan Access Map - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.
After clicking the Please Select button, the following window will appear:
Select the radio button next to the entry to use that ACL in the configuration.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the OK button to accept the selection made.

ACL VLAN Access Map

This window is used to display and configure the ACL VLAN access map settings.
To view the following window, click ACL > ACL VLAN Access Map, as shown below:
The fields that can be configured are described below:
Parameter
Access Map Name
Sub Map Number
Action
Counter State
Click the Apply button to accept the changes made.
Click the Clear All Counter button to clear the counter information for all the access maps.
Figure 8-18 ACL Interface Access Group (Please Select) Window
Figure 8-19 ACL VLAN Access Map Window
Description
Enter the access map's name here. This name can be up to 32 characters long.
Enter the sub-map's number here. This value must be between 1 and 65535.
Select the action that will be taken here. Options to choose from are Forward,
Drop, and Redirect. When the Redirect option is selected, select the redirected
interface from the drop-down list.
Select whether to enable or disable the counter state.
288