Acl Access List - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Unit
From Port ~ To Port
Direction
Click the Back button to return to the previous step.
Click the Apply button to accept the changes made and return to the main ACL Wizard window.

ACL Access List

This window is used to display and configure the ACLs, ACL rules and settings.
To view the following window, click ACL > ACL Access List, as shown below:
The fields that can be configured are described below:
Parameter
ACL Type
ID
ACL Name
Click the Find button to locate a specific entry based on the information entered.
Click the Add ACL button to create a new ACL.
Click the Edit button to re-configure the specific ACL.
Click the Delete button, next to the ACL, to remove the specific ACL.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the Clear All Counter button to clear all the counter information displayed.
Click the Clear Counter button to clear the counter information for the rule displayed.
Click the Add Rule button to create an ACL rule for the ACL selected.
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select the direction here. Options to choose from are In and Out.
Figure 8-8 ACL Access List Window
Description
Select the ACL type to find here. Options to choose from are All, IP ACL, IPv6
ACL, MAC ACL, and Expert ACL.
Select and enter the access list's ID here. The range is from 1 to 14999.
Select and enter the access list's name here. This name can be up to 32
characters long.
272