Port Security Port Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Trap State
Click the Apply button to accept the changes made.
The fields that can be configured in Port Security Trap Rate Settings are described below:
Parameter
Trap Rate
Click the Apply button to accept the changes made.
The fields that can be configured in Port Security System Settings are described below:
Parameter
System Maximum Address
Click the Apply button to accept the changes made.
The fields that can be configured in Port Security VLAN Settings are described below:
Parameter
VID List
VLAN Max Learning
Address
Click the Apply button to accept the changes made.
The fields that can be configured in Find VLAN are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.

Port Security Port Settings

This window is used to display and configure the port security port settings.
To view the following window, click Security > Port Security > Port Security Port Settings, as shown below:
Description
Click to enable or disable port security traps on the Switch.
Description
Enter the number of traps per second. The range is from 0 to 1000. The default
value 0 indicates an SNMP trap to be generated for every security violation.
Description
Enter the maximum number of secure MAC addresses allowed. If not specified,
the default value is No Limit. The valid range is from 1 to 6656. Tick the No Limit
checkbox to allow the maximum number of secure MAC address.
Description
Enter the VLAN ID(s) here.
Enter the maximum number of allowed MAC addresses that can be learned on
the specified VLAN(s) here. The range is from 1 to 12288. Tick the No Limit
checkbox to allow the maximum number of secure MAC address.
Description
Enter the VLAN ID that will be located here.
294