Ssl Service Policy - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.

SSL Service Policy

This window is used to display and configure the SSL service policy settings.
To view the following window, click Security > SSL > SSL Service Policy, as shown below:
The fields that can be configured are described below:
Parameter
Policy Name
Version
Session Cache Timeout
Secure Trustpoint
Description
• Selecting Local specifies to import local certificate and key pairs only.
Figure 9-96 SSL Service Policy Window
Description
Enter the SSL service policy name here. This name can be up to 32 characters
long.
Select the SSL or TLS version.
• SSL 3.0: Select to use SSL version 3.0 as the SSL service policy.
• TLS 1.0: Select to use TLS version 1.0 as the SSL service policy.
• TLS 1.1: Select to use TLS version 1.1 as the SSL service policy.
• TLS 1.2: Select to use TLS version 1.2 as the SSL service policy.
Enter the session cache timeout value used here. This value must be between 60
and 86400 seconds. By default, this value is 600 seconds.
Enter the secure trust point's name here. This name can be up to 32 characters
366