Time Range - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Poll Interval
Click the Apply button to accept the changes made.
The fields that can be configured in SNTP Server Settings are described below:
Parameter
IPv4 Address
IPv6 Address
Click the Add button to add the SNTP server.
Click the Delete button to remove the specified entry.

Time Range

This window is used to display and configure the time profile settings.
To view the following window, click System > Time Range, as shown below:
The fields that can be configured are described below:
Parameter
Range Name
From Week ~ To Week
From Time ~ To Time
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete Periodic button to delete the periodic entry.
Description
Enter the synchronizing interval in seconds. The value is from 30 to 99999
seconds. The default interval is 720 seconds.
Description
Enter the IPv4 address of the SNTP server which provides the clock
synchronization.
Enter the IPv6 address of the SNTP server which provides the clock
synchronization.
Figure 3-19 Time Range Window
Description
Enter the time profile's range name here. This name can be up to 32 characters
long.
Select the starting and ending days of the week that will be used for this time
profile. Tick the Daily option to use this time profile for every day of the week. Tick
the End Week Day option to use this time profile from the starting day of the
week until the end of the week, which is Sunday.
Select the starting and ending time of the day that will be used for this time profile.
The first drop-down menu selects the hour and the second drop-down menu
selects the minute.
23