Vlan Mapping Profile - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Original Inner VID
Action
VID
Inner VID
Priority
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

VLAN Mapping Profile

This window is used to display and configure the VLAN mapping profile settings.
To view the following window, click L2 Features > VLAN Tunnel > VLAN Mapping Profile, as shown below:
The fields that can be configured are described below:
Parameter
Profile ID
Type
Description
Enter the original inner VLAN's ID here. The range is from 1 to 4094.
Select the action that will be taken here. Options to choose from are Translate
and Dot1q-tunnel.
• Translate - Specifies that the outer-VID will replace the outer-VID of the
matched packets.
• Dot1q-tunnel - Specifies that the outer-VID will be added for matched
packets.
Enter the VLAN's ID here. The range is from 1 to 4094.
Enter the inner VLAN's ID here. The range is from 1 to 4094.
Select the 802.1p priority value here. The range is from 0 to 7. A lower value has
a higher priority.
Figure 5-43 VLAN Mapping Profile Window
Description
Enter the ID of the VLAN mapping profile here. A lower ID has a higher priority.
The ID range is from 1 to 1000.
Select the profile type here. Different profiles can match different fields. Options to
choose from are Ethernet, IP, IPv6, and Ethernet-IP.
• Ethernet - The profile can match Layer 2 fields.
• IP - The profile can match Layer 3 IP fields.
132