Configuration Backup To Ftp - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Source File
Destination File
Click the Backup button to initiate the configuration file backup.

Configuration Backup to FTP

This window is used to initiate a configuration file backup to an FTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to FTP, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
FTP Server IP
TCP Port
Figure 13-15 Configuration Backup to TFTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the TFTP server's IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the TFTP server in the space provided.
Enter the source filename and path of the configuration file located on the Switch
here. This field can be up to 64 characters long. Select the running-config option
to back up the running configuration file from the Switch. Select the startup-
config option to back up the start-up configuration file from the Switch.
Enter the destination path and location where the configuration file should be
stored on the TFTP server. This field can be up to 64 characters long.
Figure 13-16 Configuration Backup to FTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the FTP server's IP address here. When select the IPv4 option, enter the
IPv4 address of the FTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the FTP server in the space provided.
Enter the TCP port number used for the FTP connection here. The range is from
1 to 65535.
427