Configuration Backup To Http; Configuration Backup To Tftp - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
RCP Server IP
User Name
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.

Configuration Backup to HTTP

This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
Source File
Click the Backup button to initiate the configuration file backup.

Configuration Backup to TFTP

This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as
shown below:
Description
Select the Switch unit that will be used for this configuration here.
Enter the RCP server's IP address here.
Enter the user name used for the RCP connection here. This name can be up to
32 characters long.
Enter the source filename and path of the configuration file located on the RCP
server here. This field can be up to 64 characters long.
Enter the destination path and location where the configuration file should be
stored on the Switch. This field can be up to 64 characters long. Select the
running-config option to restore and overwrite the running configuration file on
the Switch. Select the startup-config option to restore and overwrite the start-up
configuration file on the Switch.
Select this option to replace the configuration file on the Switch with this one.
Figure 13-14 Configuration Backup to HTTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the source filename and path of the configuration file located on the Switch
here. This field can be up to 64 characters long. Select the running-config option
to back up the running configuration file from the Switch. Select the startup-
config option to back up the start-up configuration file from the Switch.
426