D-Link DXS-3400 SERIES Web Ui Reference Manual page 299

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Click the Clear Counter button to the clear the counter information for the specified access map.
Click the Find button to locate a specific entry based on the information entered.
Click the Binding button to match an access list to the ACL VLAN access map.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Binding button, the following window will appear:
The fields that can be configured are described below:
Parameter
Match IP Access-List
Match IPv6 Access-List
Match MAC Access-List
Click the Please Select button navigate to a list of access lists that can be selected to be used in this configuration.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
After clicking the Please Select button, the following window will appear:
Select the radio button next to the entry to use that access list in the configuration.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Click the OK button to accept the selection made.
Figure 8-20 ACL VLAN Access Map (Binding) Window
Description
Here the IP access list that will be matched will be displayed.
Here the IPv6 access list that will be matched will be displayed.
Here the MAC access list that will be matched will be displayed.
Figure 8-21 ACL VLAN Access Map (Binding, Selection) Window
289