D-Link DXS-3400 SERIES Web Ui Reference Manual page 116

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
MAC Address Notification
Interval
History Size
MAC Notification Trap State
Unit
From Port ~ To Port
Added Trap
Removed Trap
Click the Apply button to accept the changes made for each individual section.
After selecting the MAC Notification History tab, at the top of the page, the following page will be available.
On this page, a list of MAC notification messages will be displayed.
Figure 5-7 MAC Notification (MAC Notification Settings) Window
Description
Select to enable or disable MAC notification globally on the Switch
Enter the time value between notifications. This value must be between 1 and
2147483647 seconds. By default, this value is 1 second.
Enter the maximum number of entries listed in the history log used for notification.
This value must be between 0 and 500. By default, this value is 1.
Select to enable or disable the MAC notification trap state.
Select the stacking unit ID of the Switch that will be configured here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the added trap for the port(s) selected.
Select to enable or disable the removed trap for the port(s) selected.
Figure 5-8 MAC Notification (MAC Notification History) Window
106