Layer 3 Features; Arp; Arp Aging Time; Static Arp - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
6.

Layer 3 Features

ARP

Gratuitous ARP
IPv6 Neighbor
Interface
UDP Helper
IPv4 Static/Default Route
IPv4 Static Route BFD
IPv4 Route Table
IPv6 Static/Default Route
IPv6 Route Table
Route Preference
IPv6 General Prefix
RIP
RIPng
IP Multicast Routing Protocol
BFD
IP Route Filter
Policy Route
VRRP Settings
VRRPv3 Settings
ARP

ARP Aging Time

This window is used to display and configure the ARP aging time settings.
To view the following window, click L3 Features > ARP > ARP Aging Time, as shown below:
The fields that can be configured are described below:
Parameter
Timeout
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Static ARP

This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
Figure 6-1 ARP Aging Time Window
Description
After click the Edit button, enter the ARP aging timeout value here.
190