Multicast Filtering - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VID
Group Address
Click the Find button to generate the display based on the information entered.
PIM Snooping Statistics Table
This window is used to display and clear the PIM snooping statistics table.
To view the following window, click L2 Features > L2 Multicast Control > PIM Snooping > PIM Snooping
Statistics Table, as shown below:
The fields that can be configured are described below:
Parameter
VID
Click the Find button to generate the display based on the information entered.
Click the Clear button to clear the statistics information related to the specified VLAN.
Click the Clear All button to clear all the statistics information displayed in the table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Multicast Filtering

This window is used to display and configure the Layer 2 multicast filtering settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast Filtering, as shown below:
Figure 5-86 PIM Snooping Mroute Table Window
Description
Select and enter the VLAN ID that will be used in this display here. The range is
from 1 to 4094.
Select and enter the group address here.
Figure 5-87 PIM Snooping Statistics Table Window
Description
Select and enter the VLAN ID that will be used here. The range is from 1 to 4094.
178