D-Link DXS-3400 SERIES Web Ui Reference Manual page 97

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
• SIM can simplify management of small workgroups or wiring closets while scaling the network to handle
increased bandwidth demand.
• SIM can reduce the number of IP address needed in your network.
• SIM can eliminate any specialized cables for stacking connectivity and remove the distance barriers that
typically limit your topology options when using other stacking technology.
Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules:
• SIM is an optional feature on the Switch and can easily be enabled or disabled through the Command Line
Interface or Web Interface. SIM grouping has no effect on the normal operation of the Switch in the user's
network.
• There are three classifications for Switches using SIM. The Commander Switch (CS), which is the master
Switch of the group, Member Switch (MS), which is a Switch that is recognized by the CS a member of a SIM
group, and a Candidate Switch (CaS), which is a Switch that has a physical link to the SIM group but has not
been recognized by the CS as a member of the SIM group.
• A SIM group can only have one Commander Switch (CS).
• A SIM group accepts up to 32 Switches (numbered 1-32), not including the Commander Switch (numbered 0).
• Members of a SIM group cannot cross a router.
• There is no limit to the number of SIM groups in the same IP subnet (broadcast domain); however a single
Switch can only belong to one group.
• If multiple VLANs are configured, the SIM group will only utilize the management VLAN on any Switch.
• SIM allows intermediate devices that do not support SIM. This enables the user to manage Switches that are
more than one hop away from the CS.
The SIM group is a group of Switches that are managed as a single entity. The Switch may take on three different
roles:
1. Commander Switch (CS) - This is a Switch that has been manually configured as the controlling device for a
group, and takes on the following characteristics:
 It has an IP Address.
 It is not a command Switch or member Switch of another Single IP group.
 It is connected to the member Switches through its management VLAN.
2. Member Switch (MS) - This is a Switch that has joined a single IP group and is accessible from the CS, and it
takes on the following characteristics:
 It is not a CS or MS of another IP group.
 It is connected to the CS through the CS management VLAN.
3. Candidate Switch (CaS) - This is a Switch that is ready to join a SIM group but is not yet a member of the SIM
group. The Candidate Switch may join the SIM group of the Switch by manually configuring it to be a MS of a
SIM group. A Switch configured as a CaS is not a member of a SIM group and will take on the following
characteristics:
 It is not a CS or MS of another Single IP group.
 It is connected to the CS through the CS management VLAN
The following rules also apply to the above roles:
• Each device begins in a Candidate state.
• A CS must change its role to CaS and then to MS, to become a MS of a SIM group. Thus, the CS cannot
directly be converted to a MS.
• The user can manually configure a CS to become a CaS.
• A MS can become a CaS by:
 Being configured as a CaS through the CS.
 If report packets from the CS to the MS time out.
• The user can manually configure a CaS to become a CS
87