D-Link DXS-3400 SERIES Web Ui Reference Manual page 185

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured in Group Profile Settings are described below:
Parameter
Profile Name
Action
Address Type
From IP Address
To IP Address
Click the Apply button to accept the changes made.
The fields that can be configured in Access Group Settings are described below:
Parameter
VID
Profile Name
Action
Figure 5-83 Multicast VLAN Group Settings Window
Description
Enter the group profile name for the multicast VLAN feature here. This name can
be up to 32 characters long.
Select the action that will be taken here. Options to choose from are Add and
Delete. Multiple ranges can be added to a multicast VLAN profile. The IP address
ranges, specified in a single profile, must be of the same address family.
Select the address type here. Options to choose from are IPv4 and IPv6.
• IPv4 - Specifies to use IPv4 multicast addresses in the range.
• IPv6 - Specifies to use IPv6 multicast addresses in the range.
Enter the source IPv4/IPv6 address here.
Enter the destination IPv4/IPv6 address here.
Description
Enter the multicast VLAN's ID that will be used here. The range is 1 to 4094.
Enter the group profile name for the multicast VLAN feature here. This name can
be up to 32 characters long.
Select the action that will be taken here. Options to choose from are Add and
Delete. This is to add or delete the multicast group entirely.
175