Cpu Protect Type - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured in CPU Protect Sub-Interface are described below:
Parameter
Sub-Interface
Rate Limit
Click the Apply button to accept the changes made.
The fields that can be configured in Sub-Interface Information are described below:
Parameter
Sub-Interface
Click the Find button to locate a specific entry based on the information entered.

CPU Protect Type

This window is used to display and configure the CPU protection type settings.
To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below:
The fields that can be configured in CPU Protect Type are described below:
Parameter
Protocol Name
Rate Limit
Figure 9-80 CPU Protect Sub-Interface Window
Description
Select the sub-interface option here. Options to choose from are Manage,
Protocol, and Route.
Enter the rate limit value used here. This value must be between 0 and 1024
packets per second. Tick the No Limit option to disable the rate limit.
Description
Select the sub-interface option here. Options to choose from are Manage,
Protocol, and Route.
Figure 9-81 CPU Protect Type Window
Description
Select the protocol name option here.
Enter the rate limit value used here. This value must be between 0 and 1024
packets per second. Tick the No Limit option to disable the rate limit.
355