Dhcp Class Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Service DHCP State
Click the Apply button to accept the changes made.
The fields that can be configured in Service IPv6 DHCP are described below:
Parameter
Service IPv6 DHCP State
Click the Apply button to accept the changes made.

DHCP Class Settings

This window is used to display and configure the DHCP class and the DHCP option matching pattern for the DCHP
class.
To view the following window, click Management > DHCP > DHCP Class Settings, as shown below:
The fields that can be configured are described below:
Parameter
Class Name
Click the Apply button to accept the changes made.
Click the Edit button to modify the DHCP option matching pattern for the corresponding DCHP class.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following window will appear.
Description
Select this option to enable or disable the DHCP relay and server service.
Description
Select this option to enable or disable the IPv6 DHCP relay and server service.
Figure 4-26 DHCP Class Settings Window
Description
Enter the DHCP class name with a maximum of 32 characters.
Figure 4-27 DHCP Class Settings (Edit) Window
46