Rip; Rip Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface VLAN
Prefix Name
IPv6 Address
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

RIP

RIP Settings

This window is used to display and configure the Routing Information Protocol (RIP) feature's settings.
To view the following window, click L3 Features > RIP > RIP Settings, as shown below:
Figure 6-27 IPv6 General Prefix Window
Description
Enter the VLAN interface ID used here. The range is from 1 to 4094.
Enter the IPv6 general prefix entry's name here. This name can be up to 12
characters long.
Enter the IPv6 address and prefix length here.
208