Page 1
HowTo Stack DXS-3400-Series The DXS-3400-Series is a stackable switch. The Stack can be built by 2 (single ring/chain) ports or 4 (double ring/chain) ports. Be advised, that depending of which Stacking mode (2-port or 4-port) you choose the stacking ports will differ. Example of Single Duplex Chain, showing different ports - 1 -...
Page 2
Example of Single Duplex Ring, showing different ports - 2 -...
Page 3
Basically we recommend to set up the devices separately and to do the basic stack configuration by CLI/console 115200 baud 8 parity bits (8) No parity (N) 1 Stopbit (1) Login into the device and change into the „enable“ mode by typing Enable Afterwards change into the configuration mode to do the stack configuration configure terminal...
Need help?
Do you have a question about the DXS-3400 Series and is the answer not in the manual?
Questions and answers