D-Link DXS-3400 SERIES Web Ui Reference Manual page 99

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured in SIM State Configure are described below:
Parameter
SIM State
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Role Configure are described below:
Parameter
Role State
Group Name
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Settings are described below:
Parameter
Trap State
Interval
Hold Time
Management VLAN
Click the Apply button to accept the changes made.
Figure 4-81 Single IP Settings Window
Description
Select this option to enable or disable the SIM state on the Switch. Select
Disabled to render all SIM functions on the Switch inoperable.
Description
Select to change the SIM role of the Switch. Options to choose from are
Candidate, and Commander.
• Candidate - A Candidate Switch (CaS) is not the member of a SIM group but
is connected to a Commander Switch. This is the default setting for the SIM
role of the Switch.
• Commander - Select to make the Switch a Commander Switch (CS). The
user may join other Switches to this Switch, over Ethernet, to be part of its
SIM group. Choosing this option will also enable the Switch to be configured
for SIM.
Enter a group name. This is optional. This name is used to segment Switches into
different SIM groups.
Description
Select to enable or disable the SIM trap state here.
Enter the interval in seconds. The range is from 30 to 90.
Enter the hold-time in seconds. The range is from 100 to255.
Enter the single IP management message VLAN ID.
89