AudioCodes Mediant 800B User Manual page 217

Gateway & e-sbc
Hide thumbs Also See for Mediant 800B:
Table of Contents

Advertisement

User's Manual
3.
Configure a DHCP server according to the parameters described in the table below.
4.
Click Apply.
Table 15-2: DHCP Servers Table Parameter Descriptions
Parameter
General
Index
dhcp server <index>
Interface Name
network-if
[DhcpServer_InterfaceName]
Start IP Address
start-address
[DhcpServer_StartIPAddress]
End IP Address
end-address
[DhcpServer_EndIPAddress]
Subnet Mask
subnet-mask
[DhcpServer_SubnetMask]
Lease Time
lease-time
[DhcpServer_LeaseTime]
DNS
DNS Server 1
dns-server-1
[DhcpServer_DNSServer1]
Version 7.2
Defines an index number for the new table row.
Note:
Each row must be configured with a unique index.
Currently, only one index row can be configured.
Associates an IP interface on which the DHCP server operates.
The IP interfaces are configured in the IP Interfaces table (see
'Configuring IP Network Interfaces' on page 135).
By default, no value is defined.
Defines the starting IP address (IPv4 address in dotted-decimal
format) of the IP address pool range used by the DHCP server
to allocate addresses.
The default value is 192.168.0.100.
Note: The IP address must belong to the same subnet as the
associated interface's IP address.
Defines the ending IP address (IPv4 address in dotted-decimal
format) of the IP address pool range used by the DHCP server
to allocate addresses.
The default value is 192.168.0.149.
Note: The IP address must belong to the same subnet as the
associated interface's IP address and must be "greater or
equal" to the starting IP address defined in 'Start IP Address'.
Defines the subnet mask (for IPv4 addresses) for the DHCP
client. The value is sent in DHCP Option 1 (Subnet Mask).
The default value is 0.0.0.0.
Note: The value must be "narrower" or equal to the subnet
mask of the associated interface's IP address. If set to "0.0.0.0",
the subnet mask of the associated interface is used.
Defines the duration (in minutes) of the lease time to a DHCP
client for using an assigned IP address. The client needs to
request a new address before this time expires. The value is
sent in DHCP Option 51 (IP Address Lease Time).
The valid value range is 0 to 214,7483,647. The default is 1440.
When set to 0, the lease time is infinite.
Defines the IP address (IPv4) of the primary DNS server that
the DHCP server assigns to the DHCP client. The value is sent
in DHCP Option 6 (Domain Name Server).
The default value is 0.0.0.0.
217
Description
Mediant 800B Gateway & E-SBC
15. Services

Advertisement

Table of Contents
loading

Table of Contents