Ddns - FLIR QUASAR CP-3211 User And Installation Manual

Note:
To enable this function, make sure the UPnP component is installed on your computer. Refer to
Install UPnP Components
· Enable UPnP port forwarding – When UPnP port forwarding is enabled, the camera is allowed to
open the web server port on the router automatically.
Note:
To enable this function, make sure that your router supports UPnP and that it is activated.
Friendly name – Enter the name for the camera for identification.
·
Click Save to save the settings.
9.3.4

DDNS

Dynamic Domain Name System (DDNS) allows a host name to be constantly synchronized with a
dynamic IP address. This permits those using a dynamic IP address to be accessed by a static domain
name. DDNS configuration settings are entered in the System > Network > DDNS screen:
To use DDNS
1. Select the Enable DDNS checkbox.
2. From the Provider drop-down list, select a DDNS host provider name.
3. In the Host name text box, enter the registered domain name.
4. In the Username/E-mail text box, enter the username or e-mail address required by the DDNS
provider for authentication.
5. In the Password/Key text box, enter the password or key required by the DDNS provider for
authentication.
6. Click Save to save the setting.
September 12, 2016
for the Windows 7, 8, 8.1, and 10 procedure.
DDNS Screen
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
75