Table of Contents
Advertisement
The screen includes the following settings:
·
RTP over UDP
RTP over RTSP (TCP)
·
·
RTSP over HTTP
MJPEG over HTTP
·
·
Multicast mode – Enter in each field all required data, including Multicast H.264-1 Video Address,
Multicast H.264-2 Video Address, Multicast MJPEG Video Address, Multicast Audio Address, and
Multicast TTL.
Click Save to confirm the settings.
9.4.4
Video Frame Rate
From the Video Frame Rate screen, you can specify the frames per second (fps) for each video
compression format.
MJPEG/H.264 Frame Rate Setting
When operating the unit in H.264-only mode, the default frame is 30 fps in NTSC and 25 fps in PAL.
Note:
A lower frame rate decreases video smoothness.
The following settings apply when operating the unit in any mode other than H.264-only:
MJPEG – The setting range of the MJPEG Frame Rate is from 1 to 30 in NTSC and 1 to 25 in
·
PAL. The default setting is 30 fps in NTSC and 25 fps in PAL.
H.264-1 – The setting range for the H-264-1 Frame Rate is from1 to 30 in NTSC and 1 to 25 in
·
PAL.
·
H.264-2 – The setting range for the H-264-2 Frame Rate is from 1 to 30 in NTSC and 1 to 25 in
PAL.
Click Save to confirm the settings.
September 12, 2016
Video Frame Rate Screen
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
107
Advertisement
Table of Contents
