9.5.1
Preset
The PTZ tab opens on the Preset Point screen.
From the Preset Point page, you can program up to 256 Preset Points to target a specific view in the Live
View pane.
To program a Preset Point
1. Move the cursor to the Live View pane.
2. Left-click and drag the red pointer to the desired position.
3. Adjust the fine zoom/focus ratio.
4. Under Preset setting, assign an unused number to the Preset Point from the drop-down menu. Click
PrePage or NextPage for additional numbers.
5. In the Name text box, enter a friendly name for the Preset Point.
6. Click Set to save settings.
To move the camera to a Preset position
1. Under Preset go, select the desired Preset Point from the Preset drop-down menu.
2. Use the PrePage or NextPage buttons located under Preset setting for additional numbers. The
camera moves to the target position.
To delete a Preset
1. Select the desired Preset Point from the drop-down menu.
2. Click Delete to remove the Preset.
September 12, 2016
Preset Point Screen
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
111