System Tab - FLIR QUASAR CP-3211 User And Installation Manual

Configuration and Operation
Expand PTZ Control Panel
·
Use the PTZ control panel to quickly and easily control iris, angle, tilt, and zoom
settings for the Live View pane, and to run Presets, Pattern lines, and Sequence
paths.
Click this button to expand the PTZ control panel:
· The PT Speed setting controls the rate at which the pan and tilt changes. Set a
number between 1 and 10 as the PT Speed every time users pan or tilt the camera
via the Pan & Tilt Direction Control Panel.
· To stop running a Pattern or Sequence path, move the cursor to the Live View pane
and move the camera in any direction.
· Select a Preset/Pattern/Sequence line and start it by clicking the Run button.
See PTZ Settings
Live View Pane Pan/Tilt Control
·
Control pan/tilt by left-clicking the cursor in the Live View pane and dragging the
pointer in any direction. Placing the pointer close to the center of the image results
in a slow rate of change. Placing the pointer further from the center results in a more
rapid rate of change.
9.3

System Tab

The Settings tab in the Navigation Bar opens the sections in the sidebar that are used for configuring the
Each category in the sidebar is explained in the following sections.
camera.
Note:
The System screen is accessible only by the Administrator.
60
for detailed information about these functions.
CP-3211/CP-4221 User and Installation Guide
September 12, 2016