Ddns - FLIR Quasar CM-6405 Installation And User Manual

Operation and Configuration
Note:
To enable this function, make sure the UPnP component is installed on your computer. Refer to
Install UPnP Components
·
Enable UPnP port forwarding – When UPnP port forwarding is enabled, the camera is allowed to
open the web server port on the router automatically.
Note:
To enable this function, make sure that your router supports UPnP and that it is activated.
·
Friendly name – Enter the name for the camera for identification.
Click SAVE when finished.
4.4.3.6

DDNS

Dynamic Domain Name System (DDNS) allows a host name to be constantly synchronized with a
dynamic IP address. This permits those using a dynamic IP address to be accessed by a static domain
name. DDNS configuration settings are entered in the System > Network > DDNS screen.
CM-640x Installation and User Guide - Revision 100 - December 2020
Direct Access to Camera with UPnP Enabled
for the Windows 7, 8, 8.1, and 10 procedure.
This document does not contain any export-controlled information.
45