FLIR Ariel CM-3102 User And Installation Manual
  1. Manuals
  2. Brands
  3. FLIR Manuals
  4. Security Camera
  5. Ariel CM-3102
  6. User and installation manual

FLIR Ariel CM-3102 User And Installation Manual

Hide thumbs Also See for Ariel CM-3102:
Table of Contents

Advertisement

Quick Links

Ariel
User and
Installation
Guide
CM-3102
Ver. 5
December 12, 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ariel CM-3102 and is the answer not in the manual?

Questions and answers

Related Manuals for FLIR Ariel CM-3102

Summary of Contents for FLIR Ariel CM-3102

  • Page 1 Ariel User and Installation Guide CM-3102 Ver. 5 December 12, 2018...
  • Page 2 © 2018 FLIR Systems, Inc. All rights reserved worldwide. No parts of this manual, in whole or in part, may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable form without the prior written permission of FLIR Systems, Inc.
  • Page 3 Business users should contact their supplier or refer to their purchase contract. Document History Version Date Comment July 21, 2016 Previous release December 12, 2018 Updated showing information available on the Website, Minimum SD card recommendation December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 4 Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 5: Table Of Contents

    Document Scope and Purpose ....................1 Introduction ..........................8 Features .......................... 8 Package Contents ......................9 Downloading Product Information from the FLIR Website ..........9 Hardware Description ......................10 CM-3102-01-I Fixed Focal Camera Dimensions ............10 CM-3102-11-I Varifocal Camera Dimensions ............... 11 System Requirements ......................
  • Page 6 Figure 52: Basic Settings Dialog Box ....................... 49 Figure 53: UPnP User Input Screen ......................50 Figure 54: Network > FTP Screen ......................51 Figure 55: Network > RTSP Screen ......................51 Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 7 Figure 101: Picture Adjustment Screen ....................91 Figure 102: White Balance ATW Mode Screen ..................92 Figure 103: White Balance Auto Mode Screen ..................93 Figure 104: White Balance Manual Mode Settings .................. 93 December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 8 Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 9: Document Scope And Purpose

    WARNINGS and CAUTIONS shall absolve l'installateur, du propriétaire ou de l'utilisateur FLIR and its agents from any resulting dégagera FLIR Systems, Inc. et ses agents de toute liability. responsabilité en résultant. Specifications and information in this guide Les spécifications et informations contenues dans...
  • Page 10 A Tip is information and best practices that are useful or provide some benefit for installation and use of FLIR products. Un Conseil correspond à une information et aux bonnes pratiques utiles ou apportant un avantage supplémentaire pour l'installation et l'utilisation des produits FLIR. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 11 Seul un technicien formé et qualifié est autorisé à entretenir et à réparer cet équipement.  Respectez les codes et réglementations locaux, et assurez-vous que l'installation et l'utilisation sont conformes aux normes contre l'incendie et de sécurité. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 12 (refroidissement/chauffage). La température de fonctionnement doit être maintenue dans la plage (- 40° à 50°C/-40° à 122°F) pour les modèles CM-3102-x-I et de (-20°C à 65°C/-4° à 149°F) pour les modèles CM-3102-xE-I, sans condensation d'humidité supérieur à 90%. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 13 When finished with the physical installation, complete the second phase of installation, which is the setup and configuration of the unit. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 15 Document Scope and Purpose December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 16: Introduction

    UPnP support SNMP traps security protocols Backlight and highlight Gamma correction White balance compensation Electronic day/night (ICR) Digital WDR 3DNR image noise reduction ONVIF support Infrared LED illuminator Low-lux mode without IR Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 17: Package Contents

    DNA 2.2 User Manual 2.3 Downloading Product Information from the FLIR Website Detailed product and associated documentation, software download information and supporting product information can be downloaded from the FLIR website. Follow these steps to access camera information. December 12, 2018...

  • Page 18: Hardware Description

    The CM-3102-01-I camera includes a network cable with an RJ45 Ethernet jack. The cable includes an LED that flashes green to indicate power on and network activity. The link is not illuminated if there is no network activity. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 19: Cm-3102-11-I Varifocal Camera Dimensions

    The CM-3102-11-I camera includes a built-in system cable that includes an RJ-45 Ethernet jack and two (2) two-wire leads that provide an audio-in connection and an alarm-in connection. The cable includes December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 20: Figure 6: Cm-3102-11-I System Cable

    Hardware Description an LED that flashes green to indicate power on and network activity. The link is not illuminated if there is no network activity. Figure 6: CM-3102-11-I System Cable Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 22 Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 23: System Requirements

    Windows Server 2003, Windows Server 2008 (32-bit) Web Browser Microsoft Internet Explorer 10 and above (32-bit version) Network Card 10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation Viewer ActiveX control plug-in for Microsoft Internet Explorer December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 24 Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 25: Installing And Connecting The Camera

    For electrical wiring, use the properly rated sheathed cables for conditions to which the cable will be exposed (for example, moisture, heat, UV, physical requirements, etc.).  Plan ahead to determine where to install infrastructure weatherproof equipment. Whenever possible, ground components to an outdoor ground. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 26: Mounting Instructions

    Figure 7: Drill Template Remove the lower dome by loosening the set screws with the supplied Torx wrench Figure 8: Open the Dome Cover Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 27: Figure 9: Dome Ceiling Installation

    Installing and Connecting the Camera Fix the mounting base on the surface with screws. Figure 9: Dome Ceiling Installation December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 28: Figure 10: Spacer Attached To Camera Base

    Figure 11: Align Spacer Note: CM-3102-01-I units require the spacer when using the CM-RCSD-G2 recessed mount. Use the mechanical screws included with the spacer for proper mounting. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 29: Powering The Camera

    4. Comme une unité d'alimentation «Listed», le PoE doit être marqué comme «LPS» ou «Limited Power Source". 5. Ce produit doit être installé par un technicien qualifié. L'installation doit se conformer à tous les codes locaux. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 30: Connecting The Camera To The Network

    FLIR’s DNA utility to search for and change the camera’s initial IP address. 5.4.2 Configuring the Unit’s Initial IP Address Use the FLIR DNA utility to discover the unit on the network and to set the unit’s initial IP address. ...

  • Page 31: Figure 14: Login Window

    PC because it cannot verify the Ariel Player’s digital signature (because the local certificate is out of date, invalid or missing). The following message is displayed: Figure 17: Corrupt/Invalid Signature December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 32: Figure 18: View Downloads Screen

    Click Run on the information bar to install the Ariel Player plug-in. The Windows Installer opens and the Ariel Player Wizard dialog box is displayed. Figure 20: Ariel Player Setup Wizard Screen 1 Click Next to install the Ariel Player plug-in on your PC. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 33: Figure 21: Ariel Player Setup Wizard Screen 2

    Figure 21: Ariel Player Setup Wizard Screen 2 Figure 22: Ariel Player Setup Wizard Screen 3 Click Close when the Installation Complete dialog box is displayed. Figure 23: Ariel Player Setup Wizard Screen 4 December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 34: Figure 24: Run Ariel Player Plug-In Information Bar

    Click OK. The Live View screen is displayed. To manage the camera using Latitude or on a network with static IP configuration Download the DNA Utility from the website (see 2.3 Downloading Product Information from the FLIR Website). Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 35: Resetting The Camera

    5.5 Resetting the Camera The camera includes a reset button, which is located on the camera’s printed circuit board (PCB), along with the camera’s microSD card drive. Figure 28: Camera Reset/MicroSD Panel December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 36 Press the reset button for approximately five seconds. The unit reboots. Press the reset button for approximately five seconds. The unit reboots. To restore factory defaults using the reset button Press the reset button continuously for 30 seconds. The unit restores factory defaults. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 38 Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 39: Accessing The Cm-3102 Via A Web Browser

    MediaPlayer Control Module.exe plug-in. Click Allow. The Windows Installer opens and the Ariel Player Wizard dialog box is displayed. Follow instructions in section 5.4.2, Configuring the Unit’s Initial IP Address. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 40: Cm-3102 Web Interface

    To switch back to Live View mode, right-click on the screen and click Normal Display, or press the ESC key on your keyboard. The button indicates the recording status: red when recording is Manual recording button or gray when recording is Off Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 41: Cm-3102-11-I Web Interface

    Full screen button To switch back to Live View mode, right-click on the screen and click Normal Display, or press the ESC key on your keyboard. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 42: Live View

    Select the directory and folder to save the video, which is an .avi file. Click the icon to stop recording. The icon turns gray To playback a Live View recording Open the folder on the PC where the recording is stored. Select the file. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 43: Capturing A Picture

    Enter the Admin user name and password. Open the folder for the event according to the type of event (motion detection, tampering, etc.). Files are displayed chronologically according to most recent date. Select the file. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 44: Viewing Live Video From A Media Player

    1. It is also possible to change the syntax on the RTSP page, although this is not recommended if the camera is attached to a VMS. 2. Verify that the resolution entered in URL string agree with the resolution set in Streaming > Video Settings screen. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 45: Settings

    6.3.1 System Tab The System tab is used for configuring essential system settings. Click the System tab to expand the menu. The CM-3102-01-I includes the following System menu: Figure 34: CM-3102-01-I System Menu December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 46: Figure 35: Cm-3102-11-I System Menu

    Accounts Source Handler Lens Control (CM-3102-11-I only) Available only on the CM-3102-11-I, the Lens Control screen enables control of the lens zoom and focus functions. Figure 36: CM-3102-11-I Lens Control Screen Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 47: Figure 37: Date & Time Screen

    The current time is displayed in the Current Camera Time text box. To set the date and time, select Basic Configuration > Date & Time. The Date & Time screen is displayed. Figure 37: Date & Time Screen December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 48: Figure 38: Ntp Setting Section

    From the Enable drop-down list, select ON. From the Encoding drop-down list, select G.711 a-law, G.711 μ-law, or AAC. The default is AAC. From the Level drop-down list, select High, Mid, or Low. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 49: Figure 40: Firmware Screen

    The Basic Operations screen is used for the following functions:  Setting the TV format  Importing settings from another unit  Exporting settings to another unit  Rebooting the camera December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 50: Figure 42: Basic Operations Screen

    Click OK. A dialog box opens, requesting you to close the tab in your browser. Close the tab. Open a new tab in your browser, and re-enter the camera’s IP address. The camera’s Login window opens. Enter your login credentials. The camera’s home page opens. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 51 Click OK. A dialog box opens, requesting you to close the tab in your browser. Close the tab. Open a new tab in your browser, and re-enter the camera’s IP address. The camera’s Login window opens. Enter your login credentials. The camera’s home page opens. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 52: Figure 43: Osd Location Coordinates

    Set the OSD location according to the following coordinates on the X and Y axes: Figure 43: OSD Location Coordinates To configure OSD settings Select Basic Configuration > OSD. The OSD screen is displayed. Figure 44: OSD Screen Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 53: Figure 45: User Accounts-Account Setting Screen

    1. User Name and Password can include up to 16 characters, including '0' to '9', 'a' to 'z', 'A' to 'Z', '.', '-', '+', '_' and '@'. 2. The user name and password are case-sensitive. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 54: Figure 46: Default Administrator Access Level Dialog Box

    To add a new operator or user Click the empty row. Figure 47: Add User Dialog Box Click Add. The Access Level screen opens. Figure 48: Empty Access Level Dialog Box Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 55: Figure 49: Filled Access Level Dialog Box

    To modify an operator or user Click Modify. Enter the new User Name or Password. To delete an operator or user Click Delete. The operator or user is deleted from the Account Setting list. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 56: Figure 51: Network > General Screen

    From the Enable LDAP drop-down list, select ON or OFF. If you select ON, verify that the information in Network > LDAP page is correct and that the LDAP server is online. The default is OFF. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 57: Figure 52: Basic Settings Dialog Box

    Enable DHCPv6 – If you are using IPv6, select ON. The default is OFF. IPv6 Address – If you are using IPv6, enter the IPv6 address. Subnet Prefix Length – If you are using IPv6, enter the subnet prefix length (1-128 digits). December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 58: Figure 53: Upnp User Input Screen

    Server screen is used to enable remote access of the camera’s microSD card. No configuration of the camera’s internal FTP server is required by the user. The camera’s IP address is ftp://<camera IP address>. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 59: Figure 54: Network > Ftp Screen

    Figure 55: Network > RTSP Screen To configure basic settings In the Login ID text box, enter your Login ID number. Note: It is recommended, but not necessary, to enable authentication in order to use RTSP. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 60 In the Meta Port text box, enter the network port number for transmitting the metadata. If you are using the second or third stream, in the Stream2 or Stream3 section, repeat the above steps. Click Save. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 61 Enter the User Name. The default is initial. If you select MD5 or SHA, enter the Authentication Password in the Authentication Password text box. The Privacy Password text box is disabled. Click Save. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 62 Enter the User Name and Password in the respective text box. Do one of the following: Click Save. The status is displayed as “Not yet” until the configuration is saved. Click Test and Save to test and save the configuration. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 63 Click Browse to download the CA Certificate. Do one of the following: Click Save. The status is displayed as “Not Installed” until the configuration is saved. Click Test and Save to test and save the configuration. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 64 If you are using FreeDNS, the Hash text box also is displayed. Enter the Hash value, which is a hash of your user name and password. It is available from http://freedns.afraid.org. Click Save. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 65 HTTPS protocol for allowing secure IP connections between the camera and a web browser over HTTP. Note: SSL is enabled from the Network > General screen (page 48). December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 66 Organization Unit Name – Enter the name of the organizational unit to which the entity identified in the Common Name field belongs.  Email Address – Enter the email address of the person responsible for maintaining the certificate. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 67 To delete the certificate, click Delete Certificate. The certificate is deleted. To request a certificate From the Method drop-down list, select Request. The Request screen is displayed. Figure 67: SSL Request Screen Follow steps 2-4 above to obtain a self-signed certificate. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 68 To define OSD text In the OSD section, select the Enable checkbox. By default, Enable is not checked. In the Text text box, enter the text to display in the on-screen display. Click Save. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 69 In the End Time column, enter the time(s) and day(s) you want to stop recording. Select the Action checkbox if you want an action to be taken upon recording. Select the Select/Deselect All checkbox as required. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 70 Figure 71: Events Source > Alarm Screen To enable an alarm Select the Enable checkbox. To select the type of alarm From the Type drop-down list, select Normally Open or Normally Closed. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 71 In order to use this function, audio must be enabled from the System > Basic Configuration > Audio screen. Figure 72: Events Source > Audio Screen December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 72 See instructions in section 6.3.1.5.1 To enable sending an email notification See instructions in section 6.3.1.5.1. To define OSD text See instructions in section 6.3.1.5.1. To set the arming schedule See instructions in section 6.3.1.5.1. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 73 To record the event on the camera See instructions in section 6.3.1.5.1 To enable sending an email notification See instructions in section 6.3.1.5.1. To define OSD text See instructions in section 6.3.1.5.1. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 74 To activate the on-screen display in case of a network conflict In the OSD section, select Enable. By default, Enable is not checked. In the Text text box, enter the text to display in the on-screen display. Click Save. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 75 See instructions in section 6.3.1.5.1. To enable sending an email notification See instructions in section 6.3.1.5.1. To define OSD text See instructions in section 6.3.1.5.1. To set the arming schedule See instructions in section 6.3.1.5.1. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 76 See instructions in section 6.3.1.5.1. To enable sending an email notification See instructions in section 6.3.1.5.1. To define OSD text See instructions in section 6.3.1.5.1. To set the arming schedule See instructions in section 6.3.1.5.1. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 77 No_Auth – No email authentication method is used. This is the default setting.  SMTP Plain – PLAIN is the least secure of all the SASL (Simple Authentication and Security Layer) authentication mechanisms because the password is sent December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 78 FTP server's port 21 to ports > 1023 (server responds to client's control port) FTP server's ports > 1023 from anywhere (client initiates data connection to random port specified by server) Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 79 In the Clip Size text box, enter a value from 10 to 20 MB.  If you select Continuous, In the Clip Size text box, enter a value from 10 to 20 MB. Figure 82: Events Handler > Recording Settings> Continuous Screen Click Save. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 80 The default is 1 frame. In the Post-Event Capture Count text box, enter the number of frames (more than one) to capture after taking a snapshot. The default is 3 frames. Click Save. Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 81: Streaming Tab

    This mode is referred to in Latitude as “90 and 270 degrees” mode. Note: You must select H.264 when operating in Corridor mode. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 82 I-Frame as they are transmitted. Video quality is higher when the interval between I- Frames is shorter, but the video needs more network capacity. When the interval between I-Frames is longer, the video transmission uses less bandwidth, but the video quality is lower. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 83 Setting QP to a low value results in better decoded image quality, but with lower compression. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 84 The default is H.264. Configure the remaining settings as in the Stream1 section above. Note: When using H.264 for Stream3, the default bit rate is 750 bits per second. Click Save. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 85 Overall bit rate is not affected by selecting regions of interest. Enhancing the video where the quality is very important consumes more bandwidth, but enables lowering image quality and bandwidth consumption on less important zones in the scene. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 86: Camera Tab

    This is the default setting. Figure 90: Auto Exposure Mode Settings Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 87 Time – Select Fast, Normal, or Slow to set the reaction time of the IRC filter. When set to Fast, the filter switches faster between Day and Night modes. The default setting is Normal. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 88 Max Shutter Speed – Select a suitable shutter speed according to the environmental luminance. The following table displays the options: Advanced Max Shutter Speed NTSC 1/6.25 1/7.5 1/12.5 1/15 1/25 1/30 1/50 1/60 Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 89 Mode – See the explanation in the Auto Mode section above.  LED Brightness – See the explanation in the Auto Mode section above. Click Reset if you want to return to factory default settings. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 90 Mode – See the explanation in the Auto Mode section above.  LED Brightness – See the explanation in the Auto Mode section above. Click Reset if you want to return to factory default settings. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 91 Exposure Value – See the explanation in the Auto Mode section above.  Highlight Compensation – See the explanation in the Auto Mode section above.  Digital WDR – See the explanation in the Auto Mode section above. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 92 Shutter Speed – Select the shutter speed from the following options: Manual Manual Shutter Speed Shutter Speed NTSC NTSC 1/25 1/30 1/1000 1/1000 1/50 1/60 1/2500 1/2500 1/100 1/120 1/5000 1/5000 1/250 1/250 1/10000 1/10000 1/500 1/500 Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 93 This mode is recommended for outdoor environments and indoor environments with fluorescent lighting as the main light source. This is the default setting. Figure 96: Auto Shutter Exposure Mode Settings December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 94 Select High, Medium, Low, or OFF. When High is selected, the image has the highest wide dynamic range, so that the IP camera can capture the greatest scale of brightness. Selecting OFF disables this function. The default setting is Medium. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 95 LED Brightness– Select High, Medium, or Low. When set to High, the camera switches with almost no delay between Color and B/W modes. The default setting is High. Click Reset if you want to return to factory default settings. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 96 Mode – See the explanation in the Auto Mode section above.  LED Brightness – See the explanation in the Auto Mode section above. Click Reset if you want to return to factory default settings. Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 97 Exposure Value – See the explanation in the Auto Mode section above.  Highlight Compensation – See the explanation in the Auto Mode section above.  Digital WDR – See the explanation in the Auto Mode section above. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 98 In a similar manner, utilizing gain and increasing its level increases the sensitivity of the image sensor, which brightens the image and add details. This increases the level of noise in the image. Figure 100: Manual Exposure Mode Settings Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 99 The Picture Adjustment screen enables you to configure picture quality, color and mirror flip settings. Figure 101: Picture Adjustment Screen Note: Settings are saved automatically. Clicking Reset returns the settings to factory defaults. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 100 From the Mode drop-down list, select one of the following options: ATW – In ATW mode, color is continuously adjusted according to the color temperature of the scene illumination. This is the default setting. Figure 102: White Balance ATW Mode Screen Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 101 B Gain: Adjusts the blue color in the image from 0 to 511. The higher the number, the bluer the image. The default setting is 64. To quickly balance the color, click One Push. December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 102 Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 103: Appendix

    Appendix The Appendix includes the following sections:  Technical Specifications (page 96)  Network Settings (page 99)  Troubleshooting (page 100)  Acronyms and Abbreviations (page 102)  Accessories (page 103) December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 104: Technical Specifications

    Digital (78dB) (WDR) 3D Noise Reduction Manual (0-100) Privacy Mask Yes (3 masks) Orientation 0°, 180° Day/Night Removable IR Cut Filter Mirror Flip Flip/Mirror/Both/Off Audio (CM-3102-11-I) Line in Alarm (CM-3102-11-I) Alarm in Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 105 0.92kg (2.03 lbs.) Environmental Specifications CM-3102-01-I Operating Temperature -40° to 50°C (-40° to 122°F) CM-3102-11-I CM-3102-0E-I -20°C to 65°C (-4° to 149°F) CM-3102-1E-I Operating Humidity Up to 90% relative humidity (non-condensing) December 12, 2018 Ariel CM-3102 User and Installation Guide...
  • Page 106 EN55022:1998 Class A; FCC 47 CFR Part 15 Subpart B, Class B; ICES-003; EMC Directive 2004/108/EC; CISPR 22 RoHS compliant, excluding Pb in 2LI (lead on second level Environmental interconnect); WEEE Directive 2012/19/EU; REACH Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 107: Network Settings

    Time synchronization with a network time server using SNTP RTSP RTP session setup 2000 to Multimedia streaming 65535 SNMP IP management system Sending alarm event and exception messages to the surveillance SNMP Trap port center December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 108: Troubleshooting

    Reset the browser security settings to the default value. displayed on the main Check that the correct port was configured. The default port is menu or the view menu 554. of the web interface Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 109 Reddish picture and Check the PoE power supply and associated network cables. incorrect colors in the Connect directly to the PoE and compare the images. If the image problem persists, contact support. December 12, 2018 Ariel CM-3102 User and Installation Guide...

  • Page 110: Acronyms And Abbreviations

    Open Network Video Interface Forum On-Screen Display Region of Interest Real-time Transport Protocol RTSP Real-time Streaming Protocol Secure Hash Algorithm Transmission Control Protocol User Datagram Protocol UPnP Universal Plug and Play Ariel CM-3102 User and Installation Guide December 12, 2018...

  • Page 111: Accessories

    Appendix Accessories The following mounting accessories are available from FLIR for installation of your Ariel Gen II CM-3102 Series Mini-Dome IP Camera. For more information on available options, contact your FLIR sales representative or visit www.FLIR.com/security to request details on where to get the accessories you need.
  • Page 112 Appendix Image Name Description CM-BKBX-31 Back Box Ariel CM-3102 User and Installation Guide December 12, 2018...
  • Page 113 PH: +1 888.747.3547 (Support) FX: +1 805.685.2711 www.flir.com/security Corporate Headquarters FLIR Systems, Inc. 27700 SW Parkway Ave. Wilsonville, OR 97070 PH: +1 503.498.3547 FX: +1 503.498.3153 Document: Ariel CM-3102 User and Installation Guide Version: 3 Date: December 12, 2018 Language: en-US...

This manual is also suitable for:

Ariel cm-3102-01-iAriel cm-3102-0e-iAriel cm-3102-11-iAriel cm-3102-1e-i

Table of Contents