9 Configuration and Operation
The Quasar Gen I CP series camera is provided with a browser-based configuration interface for video
playback and recording. In this chapter, information about main page introduction, system related settings
and camera settings are described in detail.
Additionally, if FLIR's Latitude VMS is used, many of the configurations and features of FLIR's VMS provide
configuration and automation of the camera.
This section includes the following information:
·
Browser-Based Viewer Introduction
Live Screen
·
·
System Tab
Streaming Tab
·
·
PTZ Tab
Logout
·
9.1
Browser-Based Viewer Introduction
The figure below shows the Quasar Gen I CP-3211/CP-4221 camera's browser-based user interface.
September 12, 2016
Browser-Based User Interface
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
55