Configuration and Operation
9.3.7
HTTP
An HTTP notification server detects notification messages of triggered events sent from cameras. HTTP
notifications are set by selecting the Send HTTP notification checkbox on the Application, and
Detection
screens.
Two notification server accounts (Alarm Triggered and Motion Detection) can be set up and sent to the
specified HTTP servers. For each server, enter the HTTP details, including server IP address, user name,
and password. Settings are entered in the System > Network > HTTP screen:
Click Save when finished.
9.3.8
Application
The Application screen is used to control input and output alarms and messages, which are generated
when an event is recognized by the system.
78
HTTP Screen
Application Screen
CP-3211/CP-4221 User and Installation Guide
Motion
September 12, 2016