9.3.3.3
SNMP
The Simple Network Management Protocol (SNMP) enables the camera to be monitored and managed
remotely by the network management system. SNMP configuration settings are entered in the System >
Network > SNMP screen.
SNMP v1/v2
Enable SNMP v1 or Enable SNMP v2 – Select the version of SNMP (v1 or v2) to use by checking
·
the relevant box.
·
Read Community – Specify the community name that has read-only access to all supported
SNMP objects. The default value is public.
Write Community – Specify the community name that has read/write access to all supported
·
SNMP objects (except read-only objects). The default value is private.
SNMP v3
SNMP v3 provides important security features including:
Confidentiality – Encryption of packets to prevent snooping by an unauthorized source.
·
Integrity – Message integrity to ensure that a packet has not been tampered with in transit
·
including an optional packet replay protection mechanism.
·
Authentication – To verify that the message is from a valid source.
To enable the SNMP v3 protocol, enter the appropriate data and passwords requested:
·
Enable SNMP v3 – Select the checkbox.
Security Name – See note below.
·
·
Authentication Type – Select MD5 or SHA from the drop-down list. See note below.
Authentication Password – See note below.
·
·
Encryption Type – Select DES or AES from the drop-down list. See note below.
Encryption Password – See note below.
·
September 12, 2016
SNMP Settings Screen
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
73