Table of Contents
Advertisement
c. Select the unit requiring IP assignment.
d. Right-click the mouse and select the assigned IP address or click the Assign IP button to open the
DNA Assign IP dialog box.
Note:
The camera default IP Address and the subnet mask IP Address are automatically
supplied by the DHCP server.
e. In the dialog box that is displayed, enter values for the IP Address, Gateway and Netmask .
f. Click Update and wait for
g. Disconnect the Ethernet cable. The camera is ready for deployment (mounting) in a site installation.
Note:
September 12, 2016
Discovered IP Devices
OK status to be displayed.
DNA Assign IP Dialog Box
1. The camera can be connected to a PC for bench installation via an Ethernet
cross-cable.
2. The camera default IP Address is automatically set by the DHCP server. If
using Latitude, the Address must be set manually.
CP-3211/CP-4221 User and Installation Guide
Installation
21
Advertisement
Table of Contents
