Table of Contents
Advertisement
7 Configuring Communication
Settings
To configure communication settings on the camera
1. Connect the camera to the network on the same VLAN/LAN as the workstation.
2. If the network supports the default, open the DNA utility by running dna.exe which can be found
in the DNA utility folder in the supplied CD, or click the DNA icon
3. In the DNA application, click the DNA button.
4. If the Windows Firewall is enabled, a security alert window pops up.
5. To continue, click Allow Access. Latitude users should consult the Latitude Installation
Instructions on disabling the Windows Firewall.
6. Click Assign IP. All the discovered IP devices will be listed in the page, as shown in the figure
below. The camera's default IP Address is automatically supplied by the DHCP server.
September 12, 2016
Windows Firewall Screen
Discovered IP Devices
CP-3211/CP-4221 User and Installation Guide
Configuring Communication Settings
.
47
Advertisement
Table of Contents
