FLIR QUASAR CP-3211 User And Installation Manual page 41

5.3.2.5 Swan Tube Mounting
Items needed:
§ Indoor pendant mount kit or outdoor mount kit (standard with outdoor cameras)
§
Swan tube mount package (FLIR camera mounting option available separately)
§
Screws and screw anchors for fixing the swan tube onto the floor (not provided)
Swan tube mounting package contents:
§ M8x12 screw x1
§ Spring washer 8 x1
§
Pendant tube washer x1
§
Waterproof rubber gasket x1
Tools required:
§ Drill
§ Phillips and flat-head screw drivers
To install the swan tube mount
1. Attach the swan tube to the mounting surface using the appropriate screws and screw anchors
(not provided). For outdoor models, attach the waterproof gasket to the swan tube. For indoor
cameras, attach the camera to the indoor pendant mount kit by using the supplied screws.
2. Thread the cables through the swan tube and the indoor or outdoor mount kit.
3. Attach the indoor or outdoor mount kit or outdoor PTZ camera mount to the swan tube using
the supplied screws and washers.
4. For outdoor cameras, fit the waterproof gasket to the joint.
5. Connect the cables to the camera.
6. Secure the camera to the indoor or outdoor mount kit.
7. Ensure the camera is fixed completely, and that the thread holes on the camera's fixing plate
and the mount kit are aligned.
September 12, 2016
CP-3211/CP-4221 User and Installation Guide
Installation
33