Table of Contents
Advertisement
Configuration and Operation
File Name
·
File Name – Enter a file name in the field, for example image.jpg. The uploaded image's file name
format is set in this section. Select one that meets your requirements.
Add date/time suffix (default setting)
·
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
·
Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
Add sequence number suffix (limited value)
·
File Name: imageXX.jpg
X: Sequence Number
The file name suffix ends at the number being set. For example, if the setting is up to "10," the file
name will start from 00, end at 10, and then start over again.
·
Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a static
filename.
Click Save after configuring the settings.
9.3.9
Motion Detection
The motion detection function detects suspicious motion and triggers alarms when motion volume in the
detected area reaches or exceeds the determined sensitivity threshold value.
82
Motion Detection Screen
CP-3211/CP-4221 User and Installation Guide
September 12, 2016
Advertisement
Table of Contents
