Table of Contents
Advertisement
Configuration and Operation
9.4.3
Video OCX Protocol
Video OCX Protocol screen on all units except the CP-4221-30x
From the Video OCX Protocol page, you can select various protocols for streaming media over the
network. In the case of multicast networking, select Multicast mode.
The screen includes the following settings:
·
RTP over UDP
RTP over RTSP (TCP)
·
RTSP over HTTP
·
MJPEG over HTTP
·
Multicast mode – Enter in each field all required data, including Multicast IP Address, Multicast
·
H.264-1 Video Port, Multicast H.264-2 Video Port, Multicast MJPEG Video Port, Multicast Audio
Port, and Multicast TTL.
Click Save to confirm the settings.
Video OCX Protocol screen on the CP-4221-30x cameras
The Video OCX Protocol screen page for the CP-4221-300 and CP-4221-301 is displayed below:
106
Video OCX Protocol Screen
CP-4221-30x Video OCX Protocol Screen
CP-3211/CP-4221 User and Installation Guide
September 12, 2016
Advertisement
Table of Contents
