Connecting To A Ddns Address Using Syncro-V - FLIR DNB14UX2 Instruction Manual

Configuring Remote Connection

5.1 Connecting to a DDNS address using Syncro-V

NOTE: Complete all the steps above before performing the following
method.
1. Open Syncro-V and click Device Manager>Video Device Manager.
2. Click Manager. The Device Maintenance window opens.
Enter the
camera's
DDNS address
3. Under Device IP, enter the Domain Name from the confirmation email.
For example, enter tomsmith.myddns-flir.com.
4. Under Control Port, enter the camera's control port (default: 30001).
5. (Optional) Under Device Name, enter a name for the camera.
6. Click Add to add the camera to the Device List.
7. Click Save to save changes. Click OK.
20
Click Add Click Save
Control
Port