Table of Contents
Advertisement
To install the standard/compact wall mount with corner/corner mini mount
1. Cut a cable access hole in the wall.
2. Attach the corner mounting plate to the wall using the appropriate screws and screw anchors
(not provided).
3. Thread the cables through the corner mounting plate.
4. Attach the standard/compact wall mount to the corner mount using the supplied screws and
washers.
5. Thread the cables through the standard/compact wall mount with the cables coming out of the
pendant mount's outlet. For outdoor cameras, attach the waterproof gasket to the pendant
mount.
6. After threading the cables, block the entry hole with the supplied sponge to prevent insects
from entering. See
7. Thread the cables through the indoor or outdoor mount kit and attach the mount kit to the
standard/compact wall mount using the supplied screws and washers.
8. For outdoor cameras, adjust the waterproof gasket to the joint.
9. Connect the cables to the camera.
10. Secure the camera to the indoor or outdoor mount kit.
11. Ensure the camera is fixed completely, and that the thread holes on the camera's fixing plate
and the mount kit are aligned.
12. Screw in the supplied screw and washer.
Corner Wall Mounting: Corner Standard/Mini Mounting Plate + Standard Wall Mount + Mount Kit
September 12, 2016
Standard or Compact Wall
CP-3211/CP-4221 User and Installation Guide
Mount, Step 3.
Installation
39
Advertisement
Table of Contents
