Camera - Misc3 - FLIR QUASAR CP-3211 User And Installation Manual

Configuration and Operation

9.5.12 Camera - Misc3

The Camera-Misc3 screen is used only by the CP-4221-300 and CP-4221-301 that have the appropriate
hardware and firmware.
You can set the following camera parameters on the Camera-Misc3 page:
Exposure Value
·
· Saturation
Hue
·
Brightness
·
Contrast
·
Exposure Value
You can set the Exposure Value for each exposure mode on the CP-4221-30x. This is a number that
represents a combination of a camera's shutter speed and aperture setting (f-number), which brightens or
darkens the scene accordingly. Select a setting from 0 to 12. The higher the number, the brighter the
image. The default setting is 6. Click Set to confirm the new setting.
Saturation
Camera image saturation level is adjustable.Select from a range of -12 to +13 in 1dB steps.The default
setting is 4. Click Set to confirm the new setting.
Hue
Camera image hue level is adjustable. Select from a range of -13 to +12 in 1dB steps. The default setting
is 0. Click Set to confirm the new setting.
Brightness
You can adjust the image's brightness by adjusting this parameter. Select a setting from 0 to 25. To
increase video brightness, select a larger number. The default setting is 0. Click Set to confirm the new
setting.
132
Camera-Misc3 Screen ( CP-4221-30x)
CP-3211/CP-4221 User and Installation Guide
September 12, 2016