Table of Contents
Advertisement
Configuration and Operation
9.3.3
Network
From the System screen, click the Network tab.
The following screens are available from the Network tab:
Basic ·
QoS ·
·
9.3.3.1
Basic
The Basic screen is used to configure the camera's basic network settings.
It is possible to connect to the camera with either fixed or dynamic (DHCP) IP address. The camera also
provides PPPoE (Point-to-Point Protocol over Ethernet) support for users who connect to the network via
PPPoE.
The Basic screen is divided into three sections: General, Advanced and IPv6 Configuration.
General
Select one of the following options in the General area for configuring network settings:
·
Get IP address automatically
Use fixed IP address
·
·
User PPPoE
70
SNMP
UPnP
·
Network > Basic Screen
CP-3211/CP-4221 User and Installation Guide
September 12, 2016
Advertisement
Table of Contents
