1. Manuals
  2. Brands
  3. FLIR Manuals
  4. Security Camera
  5. Quasar Gen III
  6. User and installation manual

FLIR Quasar Gen III User And Installation Manual

Hide thumbs Also See for Quasar Gen III:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
Quasar Gen III
User and
Installation
Guide
CP-6302
Ver. 1
September 7, 2017
i

Advertisement

Table of Contents
loading

Related Manuals for FLIR Quasar Gen III

Summary of Contents for FLIR Quasar Gen III

  • Page 1 Quasar Gen III User and Installation Guide CP-6302 Ver. 1 September 7, 2017...
  • Page 2 © 2017 FLIR Systems, Inc. All rights reserved worldwide. No parts of this manual, in whole or in part, may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable form without the prior written permission of FLIR Systems, Inc.
  • Page 3 Business users should contact their supplier or refer to their purchase contract. Document History Version Date Comment Ver. 1 September 7, 2017 Initial FLIR release CP-6302 User and Installation Guide September 7, 2017...
  • Page 4 CP-6302 User and Installation Guide September 7, 2017...

  • Page 5: Table Of Contents

    Table of Contents Table of Contents 1. Document Scope and Purpose ..................1 2. Overview ........................7 Features ....................... 8 Package Contents ....................9 3. Introduction to the Quasar IR PTZ Camera ..............11 Camera Dimensions ..................... 11 Camera Connectors ....................12 3.2.1 Connecting the Unit to the Network ..............
  • Page 6 Table of Contents Table of Contents 9.5.5 Audio ......................96 Camera Tab ......................97 9.6.1 Exposure Screen ..................... 98 9.6.2 Picture Adjustment ..................103 9.6.3 Advanced Picture Settings ................104 9.6.4 IR Function ....................106 9.6.5 Misc. Screen ....................107 PTZ Tab ......................

  • Page 7: Document Scope And Purpose

    DIsclaimer Avis de non-responsabilité Users of FLIR products accept full Il incombe aux utilisateurs des produits FLIR de vérifier responsibility for ensuring the suitability and que ces produits sont adaptés et d'étudier le rôle des considering the role of the product detection capacités et limites de détection du produit appliqués...
  • Page 8 A Tip is information and best practices that are useful or provide some benefit for installation and use of FLIR products. Un Conseil correspond à une information et aux bonnes pratiques utiles ou apportant un avantage supplémentaire pour l'installation et l'utilisation des produits FLIR. CP-6302 User and Installation Guide September 7, 2017...
  • Page 9 Document Scope and Purpose General Cautions and Warnings Précautions et avertissements d'ordre général This section contains information that indicates a Cette section contient des informations procedure or condition where there are potential hazards. indiquant qu'une procédure ou condition présente des risques potentiels. SAVE ALL SAFETY AND OPERATING INSTRUCTIONS FOR FUTURE USE.
  • Page 10 Document Scope and Purpose Caution: · Do not drop the camera or subject it to physical shock. · Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put on the lens cap to protect the sensor from dirt.
  • Page 11 Document Scope and Purpose Site Preparation There are several requirements that should be properly addressed prior to installation at the site. The following specifications are requirements for proper installation and operation of the unit: · Ambient Environment Conditions: Avoid positioning the unit near heaters or heating system outputs.
  • Page 12 CP-6302 User and Installation Guide September 7, 2017...

  • Page 13: Overview

    Refer to the Latitude online help for information regarding configuring camera settings. Attention: Si vous utilisez le logiciel de gestion de vidéo Latitude de FLIR, nous vous conseillons de configurer les paramètres de la caméra via l'AdminCenter. En effet, l'interface Internet de la caméra peut être remplacée par les paramètres Latitude.

  • Page 14: Features

    Overview Features · · · 10x digital zoom and 1/2.8” Sony Progressive Four encoder streams 30x optical zoom scan CMOS sensor · · · Low-lux mode True day/night (ICR) PTZ tracking · · · Infrared LED illuminator IR coverage up to 200m IR illumination adjusted by zoom ratio ·...

  • Page 15: Package Contents

    Overview Package Contents Before proceeding, check that the box contains the items listed here. If any item is missing or has defects, do not install or operate the product. Contact your dealer for assistance. Hard Ceiling Mount 2-Pin 12VDC Power M4 Screw with Rubber Gasket Terminal Block Camera Body...
  • Page 16 CP-6302 User and Installation Guide September 7, 2017...

  • Page 17: Introduction To The Quasar Ir Ptz Camera

    Introduction to the Quasar IR PTZ Camera 3 Introduction to the Quasar IR PTZ Camera This chapter provides information about the camera hardware for reference before installation. The connectors included on the camera’s system cable are described. · Camera Dimensions ·...

  • Page 18: Camera Connectors

    Introduction to the Quasar IR PTZ Camera Camera Connectors Following are an illustration and explanation of the connectors located on the PTZ camera’s connector panel. Connector Locations Callout Description/Label Comments DC12V IN 12VDC two-pin terminal block connector. See pin assignment below The 12VDC connector and 24VAC connector cannot be used at the same time.
  • Page 19 Introduction to the Quasar IR PTZ Camera Note: This camera features Zero Downtime Power Switching (ZDT). When the 12VDC connector and RJ45 port are connected simultaneously, the power input is from the 12VDC connector. If the 12VDC power fails, the camera switches power to the RJ45 port until the 12VDC power source is restored. Power Connector Definition AC 24L...

  • Page 20: Connecting The Unit To The Network

    Introduction to the Quasar IR PTZ Camera 3.2.1 Connecting the Unit to the Network A Cat 5 or Cat 6 Ethernet cable is recommended for network connection. To ensure transmission quality, cable length should not exceed 100 meters (328 feet). Connect one end of the Ethernet cable to the RJ45 connector of the system cable.

  • Page 21: System Requirements

    System Requirements 4 System Requirements To access the camera via a web browser, ensure that your PC has the proper network connection and meets system requirements as described below. Item Minimum System Requirement Personal Computer Minimum: Intel® CoreTM i5-2430M, 2.4 GHz; 2GB RAM or more Recommended: Intel®...
  • Page 22 CP-6302 User and Installation Guide September 7, 2017...

  • Page 23: Installation

    Installation 5 Installation This camera is designed for indoor and outdoor installation. Observe the following installation recommendations: · Always use weatherproof equipment, such as boxes, receptacles, connectors, etc. · For electrical wiring, use the properly rated sheathed cables for conditions to which the cable will be exposed (for example, moisture, heat, UV, physical requirements, etc.).

  • Page 24: Initial Camera Configuration

    Installation Seal the cable entry hole of the outdoor mounting kit (see figure below) with thread seal tape to keep water from entering the camera. Sealing Cable Entry Hole Initial Camera Configuration To perform the initial camera configuration 1. Unpack the camera. Rotate and remove the protective cover. 2.
  • Page 25 Installation 6. Right-click the mouse and select the assigned IP address or click the Assign IP button to open the DNA Assign IP dialog box. Note: The camera default IP Address and the subnet mask IP Address are automatically supplied by the DHCP server. 7.
  • Page 26 CP-6302 User and Installation Guide September 7, 2017...

  • Page 27: Using Dna To Access The Camera

    The units may then be configured via the web interface. If FLIR’s Latitude VMS is being used, configure the unit with a static IP address rather than with DHCP. This ensures that the IP address will not automatically change in the future and interfere with configurations and communication.
  • Page 28 CP-6302 User and Installation Guide September 7, 2017...

  • Page 29: Configuring Communication Settings

    Configuring Communication Settings 7 Configuring Communication Settings To configure communication settings on the camera 1. Connect the camera to the network on the same VLAN/LAN as the workstation. 2. If the network supports the default, open the DNA utility by running dna.exe which can be found in the DNA utility folder in the supplied CD, or click the DNA icon 3.
  • Page 30 Configuring Communication Settings 7. Right-click the camera whose network property is to be changed. From the context menu that opens, select Assign IP. The Assign IP dialog is displayed. DNA Assign IP – Use DHCP Dialog Box Tip: Record the camera’s MAC address for future reference. 8.
  • Page 31 Configuring Communication Settings 9. Right-click and select Web to directly access the camera via a web browser. The web browser opens on the unit’s Login dialog box. Login Dialog Box 10. Log into the unit with the default user name Admin and password 1234. Note: 1.
  • Page 32 If the password is changed and the Latitude AdminCenter Discovery feature is in use, deselect all other proprietary types. Select "Dvtel Quasar Gen II" for Latitude 7 or "FLIR" and "Auto Select" for Latitude 8 as the Unit Type so that the new password can be configured in the Discovery tab settings.

  • Page 33: Adjusting And Framing-Up The Camera View

    Adjusting and Framing-Up the Camera View 8 Adjusting and Framing-Up the Camera View After the camera is connected to the network and running, it is necessary to frame-up the scene and adjust the camera settings to optimize the picture for the individual scenes. If Latitude is being used, consider scheduling different settings for changing ambient conditions throughout the day, week, month or seasons.
  • Page 34 CP-6302 User and Installation Guide September 7, 2017...

  • Page 35: Configuration And Operation

    · PTZ Tab · Logout Additionally, if FLIR’s Latitude VMS is used, many of the configurations and features of FLIR’s VMS provide configuration and automation of the camera. Browser-Based Viewer Introduction The figure below illustrates the camera’s browser-based user interface.
  • Page 36 Configuration and Operation The user interface displays the following information: 1. The Navigation Bar is displayed in the center of the screen containing Live and Settings buttons. · Live Button The Live screen opens by default when the camera logs on. It is used to monitor live video of the targeted area, adjust the display size, take snapshots of the view area, stop/start video streaming, record video in a designated file location, activate or de-activate a loudspeaker (audio function), and to perform a digital zoom.

  • Page 37: Live Screen

    Configuration and Operation Live Screen The camera’s Live screen is used to monitor live video. See Browser-Based User Interface. Double-clicking the Live window opens the Info dialog box, which displays key details about the video stream: Live Video Info Dialog Box Two viewing modes are available: Fullscreen and Center Mode To view the Live View screen in Fullscreen mode 1.
  • Page 38 Configuration and Operation View Mode Pane The View Mode pane includes buttons that enable convenient camera control from the Live screen. View Mode Pane The View Mode pane includes the following function buttons: The Microphone button allows the local site to talk to the remote site. Click the button to switch it on/off. This function is available only to a user who has been granted this privilege by the Administrator.
  • Page 39 Configuration and Operation Zoom: Wide/Tele Press the Tele or Wide button to control zoom in/out, or move the zoom adjustment bar to the desired zoom ratio. The range is from x1 to x30 and is displayed next to the zoom bar. The default is 1x. Focus: Auto/Manual/Near/Far Press the Near or Far button to implement continuous focus adjustment.

  • Page 40: System Tab

    Configuration and Operation · To stop running a Pattern or Sequence path, move the cursor to the Live View pane and move the camera in any direction. · The PT Speed setting controls the rate at which the pan and tilt changes. Set a number between 1 and 10 as the PT Speed every time users pan or tilt the camera via the PT control panel.

  • Page 41: System

    Configuration and Operation Details of these settings are specified in the following sections: System Security Network Events Setup Edge Recording Motion Detection Schedule File Location Maintenance Import/Export Note: The System screen is accessible only by the Administrator. 9.3.1 System The System screen is used for entering the camera’s friendly name and date and time settings. Click the System tab in the sidebar.

  • Page 42: Security

    Configuration and Operation Time format Enables a choice of formats: either year, month and day (yyyy/mm/dd) or day, month and year (dd/mm/yyyy). Sync with Computer Time Select this button to synchronize video date and time display with the PC. You can change the PC date and time in the respective text box.

  • Page 43: Admin Password

    Configuration and Operation Admin Password Change the administrator’s password by entering the new password in both text boxes. The input characters/numbers are displayed as dots for security purposes. After clicking SAVE, the web browser asks the Administrator for the new password (maximum 14 digits). Note: The following characters are valid: A-Z, a-z, 0-9,!#$%&’-.@^_~.
  • Page 44 Configuration and Operation HTTP Authentication Setting From the drop-down list, select one of the following options: · Basic – A form of authentication that uses unencrypted base64 encoding. Basic Authentication should generally only be used where transport layer security, such as HTTPS, is provided. ·...
  • Page 45 Configuration and Operation To create a self-signed certificate Before a CA-issued certificate is obtained, users can first create and install a self-signed certificate. Under the Security category, click the HTTPS tab in the sidebar. 1. On the HTTPS page, click CREATE under Create Self-Signed Certificate. The Create Self- Signed Certificate dialog box opens.
  • Page 46 Configuration and Operation To create a certificate request 1. Click Create Certificate Request to create and submit a certificate request in order to obtain a signed certificate from a CA. The Create Certificate Request dialog box opens. Create Certificate Request Dialog Box 2.
  • Page 47 Configuration and Operation 9.3.2.3 IP Filter The IP filter restricts access to the camera by denying/allowing specific IP addresses. Click the IP Filter tab under the category Security in the sidebar to display the following page. IP Filter Screen To enable the IP filter 1.
  • Page 48 Configuration and Operation 9.3.2.4 IEEE 802.1X The camera is allowed to access a network protected by 802.1X/EAPOL (Extensible Authentication Protocol over LAN). Users must contact the network administrator to obtain certificates, user IDs, and passwords. IEEE 802.1X/EAP-TLS Screen CA Certificate The CA certificate is created by the Certificate Authority for the purpose of validating itself.

  • Page 49: Network

    Configuration and Operation 9.3.3 Network From the System screen, click the Network tab. The following screens are available: Basic SNMP UPnP DDNS Mail HTTP 9.3.3.1 Basic The Basic screen is used to configure the camera’s basic network settings. Network > Basic Screen It is possible to connect to the camera with either fixed or dynamic (DHCP) IP address.
  • Page 50 Configuration and Operation Get IP address automatically If you select Get IP address automatically, you can use the DNA utility, which is provided in the supplied CD, to obtain the IP address from a DHCP server on the network. See Using the DNA Utility to Search and Access the Camera.
  • Page 51 Configuration and Operation Note: Be sure to assign a different port number for each service mentioned above. Click SAVE when finished. IPv6 Address Configuration To enable IPv6 1. Check Enable IPv6. 2. In the Address text box, enter the unit's IPv6 IP Address. 9.3.3.2 QoS (Quality of Service) provides differentiated service levels for different types of traffic packets and guarantees delivery of priority services during periods of network congestion.
  • Page 52 Configuration and Operation 9.3.3.3 SNMP The Simple Network Management Protocol (SNMP) enables the camera to be monitored and managed remotely by the network management system. SNMP configuration settings are entered in the System > Network > SNMP screen. SNMP Settings Screen SNMP v1/v2 ·...

  • Page 53: Upnp Settings

    Configuration and Operation Note: You may have to consult with your System Administrator to activate this function. Traps for SNMP v1/v2/v3 Traps are used by the camera to send messages to a management system for important events or status changes. ·...
  • Page 54 Configuration and Operation Note: To enable this function, make sure the UPnP component is installed on your computer. Refer to Install UPnP Components for the Windows 7, 8, 8.1, and 10 procedure. · Enable UPnP port forwarding – When UPnP port forwarding is enabled, the camera is allowed to open the web server port on the router automatically.
  • Page 55 Configuration and Operation To use DDNS 1. Select the Enable DDNS checkbox. 2. From the Provider drop-down list, select a DDNS host provider name.The default setting is DynDNS.org (Dynamic). 3. In the Host name text box, enter the registered domain name. 4.
  • Page 56 Configuration and Operation 9.3.3.7 The Administrator can send an alarm message to one or two File Transfer Protocol (FTP) sites when motion is detected. FTP notifications are set by selecting the checkbox for an FTP-related triggered action on the IO, Network Failure Detection, and Motion Detection...

  • Page 57: Events Setup

    Configuration and Operation 9.3.3.8 HTTP An HTTP notification server detects notification messages of triggered events sent from cameras. HTTP notifications are set by selecting the Send HTTP notification checkbox on the Motion Detection screen. Two notification server accounts (Alarm Triggered and Motion Detection) can be set up and sent to the specified HTTP servers.

  • Page 58: Alarm Type

    Configuration and Operation 9.3.4.1 The IO screen is used to control input and output alarms and messages, which are generated when an event is recognized by the system. IO Screen Alarm Switch Four alarms are available. For each alarm, the Administrator can select from the following options: ·...
  • Page 59 Configuration and Operation Triggered Action The Administrator can specify various alarm actions to take when an alarm is triggered. The following options are available: · Enable alarm output – Check this box and select the predefined type of alarm output (low or high) to enable alarm relay when a network failure is detected.
  • Page 60 Configuration and Operation Note: Images can be sent by FTP only when MJPEG is selected as the video stream from the Video Configuration screen. Specify the FTP address to use from the drop-down menu. Select the number of frames for the pre- trigger and post-trigger buffers from the drop-down menu of 1-20 frames.
  • Page 61 Configuration and Operation In the Image Frequency text box, from the drop-down list select the number of frames per seconds from 1-15 for the upload. Note: Make sure that SMTP configuration has been completed. See Mail for details. · Send HTTP notification – Select this checkbox to send a notification by HTTP. Select the destination HTTP address from the drop-down menu and specify the parameters for event notifications by the IO event triggered.

  • Page 62: Network Failure Detection

    Configuration and Operation File Name · File Name – Enter a file name in the field, for example image.jpg. The uploaded image’s file name format is set in this section. Select one that meets your requirements. · Add date/time suffix (default setting) File name: imageYYMMDD_HHNNSS_XX.jpg Y: Year, M: Month, D: Day H: Hour, N: Minute, S: Second...
  • Page 63 Configuration and Operation Detection Type In the text box, enter the IP address to ping and the time interval (in minutes) between pings. Click SAVE after configuring the settings. Triggered Action The Administrator can specify various alarm actions to take when an alarm is triggered. See the section for a detailed description of the actions.
  • Page 64 Configuration and Operation Click SAVE to save the network failure detection settings. File Name · File Name – Enter a file name in the field, for example image.jpg. The uploaded image’s file name format is set in this section. Select one that meets your requirements. ·...
  • Page 65 Configuration and Operation Triggered Action The Administrator can specify various alarm actions to take when an alarm is triggered. See the section for a detailed description of the actions. The following options are available: · Enable alarm output – Check this box and select the predefined type of alarm output (low or high) to enable alarm relay when a network failure is detected.

  • Page 66: Audio Detection

    Configuration and Operation 9.3.4.5 Audio Detection The Audio Detection screen is used for setting the audio threshold level of the audio input. An audio event is created when the threshold is exceeded. Actions include: · Sending two alarms · Sending to an FTP server ·...
  • Page 67 Configuration and Operation Triggered Action The Administrator can specify various alarm actions to take when an alarm is triggered. See the section for a detailed description of the actions. The following options are available: · Enable alarm output 1 – Check this box and select the predefined type of alarm output (low or high) to enable alarm relay when a network failure is detected.

  • Page 68: Edge Recording

    Configuration and Operation 9.3.5 Edge Recording The Events Recording tab is used for configuring settings for the various methods used for event notification. The tab includes the following screens: SD Card Network Share Recording 9.3.5.1 SD Card You can locally record up to 128GB on a Class 10 microSDXC card. The SD Card page shows the capacity information of the memory card and a recording list of all the recording files saved on the card.
  • Page 69 Configuration and Operation Disk Cleanup Setting Enable automatic recording cleanup by selecting Enable automatic disk cleanup. From the pull-down menu, specify the minimum length of time over which to remove recordings. For example, remove recordings over 10 days old. Enter the percent of disk capacity used in order to remove the oldest recordings.

  • Page 70: Network Share

    Configuration and Operation 9.3.5.2 Network Share The Network Share screen shows the capacity information of the Network Attached Storage (NAS) disk and provides a list of all the recording files saved on the disk. Network Share Screen You can also format the disk and implement automatic recording cleanup on this page. To implement NAS recording, see Recording.
  • Page 71 Configuration and Operation Storage Tools Click FORMAT to format the NAS. Disk Cleanup Setting Enable automatic recording cleanup by selecting Enable automatic disk cleanup. From the pull-down menu, specify the minimum length of time over which to remove recordings. For example, remove recordings over 10 days old.
  • Page 72 Configuration and Operation 9.3.5.3 Recording The Recording screen is used to select a device and to set a schedule for recording clips. Up to 10 schedules can be set. Recording Screen In the Recording Storage section, select the recording device: SD Card or Network Share. Note: It is not recommend to record with the microSD/SDXC card for 24/7 continuously, as it may not be able to support long term continuous data read/write.

  • Page 73: Motion Detection

    Configuration and Operation 9.3.6 Motion Detection The motion detection function detects suspicious motion and triggers alarms when motion volume in the detected region reaches or exceeds the determined sensitivity threshold value. The Live View pane on the Motion Detection screen is used for creating motion detection regions and indicating motion detection. It is possible to define up to four motion detection regions within the Live View pane.
  • Page 74 Configuration and Operation To activate Motion Detection 1. From the Motion Detection drop-down list, select a number from 1 to 4. 2. Do one of the following for each detection region: · Select On for continuous detection. · Select By schedule for scheduled detection. For instructions how to set a schedule for motion detection, refer to Schedule.

  • Page 75: Schedule

    Configuration and Operation Triggered Action The Administrator can specify various alarm actions to take when an alarm is triggered. See the section for a detailed description of the actions. The following options are available: · Enable alarm output 1 – Check this box and select the predefined type of alarm output (low or high) to enable alarm relay when motion is detected.

  • Page 76: File Location

    Configuration and Operation Note: This application is not the same as the Recording Schedule function. It is not used for recording live video. To create a new schedule or edit an existing schedule 1. Select the appropriate checkbox for the day(s) of the week (Sun, Mon, Tue, Wed, Thu, Fri and Sat) to create a schedule.

  • Page 77: Log File

    Configuration and Operation 9.3.9.1 Log File Click Log file to view the system log file. The content of the file provides information about connections after system boot-up. System Log Screen CP-6302 User and Installation Guide September 7, 2017...

  • Page 78: User Information

    Configuration and Operation 9.3.9.2 User Information The Administrator can view each user’s login information and privileges in the User information screen shown below. View User Login Information Click GET USER INFORMATION to see each user’s details. For example: Admin: 1234. This indicates that the user’s login username is Admin and the password is 1234.

  • Page 79: Factory Default

    Configuration and Operation View User Privileges Click GET USER PRIVACY to view each user’s privileges. User Information – Get User Privacy In the screen above, both Admin and User are granted privileges of I/O access, Camera control, Talk and Listen, which are the maximum privileges that can be granted. Note: User credentials and privileges are set in the User...

  • Page 80: Software Version

    Configuration and Operation Full Restore Click FULL RESTORE to restore the factory default settings. The system restarts in 30 seconds. Note: The IP address and all other settings will be restored to factory default settings. Partial Restore Click PARTIAL RESTORE to restore the factory default settings, but save the network settings. The system restarts in 30 seconds.

  • Page 81: Software Upgrade

    Configuration and Operation 9.3.9.5 Software Upgrade The Software Upgrade screen enables you to select a software file to upload. Software Upgrade Screen Note: 1. Make sure that the software upgrade file is available before performing a software upgrade. 2. Do not change the file name. If you change the upgrade file name, the system will fail to find the file.
  • Page 82 Configuration and Operation 2. From the drop-down menu of binary files in Step 2, select the file to upgrade. In the above example uImage+userland.img is selected. 3. Click UPGRADE. The system verifies that the upgrade file exists and begins to upload the file. The upgrade status bar is displayed on the page.

  • Page 83: Import/Export

    Configuration and Operation Import/Export From the Import/Export screen you can export configuration files to a specified location and retrieve data by uploading an existing configuration file to the camera. Import/Export Screen To export a configuration file 1. Click EXPORT. An information bar opens. File Download Screen 2.

  • Page 84: Video Configuration

    Configuration and Operation 9.5.1 Video Configuration The Video Configuration screen is used for configuring most video settings. The selected encoding type (video compression) determines what settings are available. By default, the camera is configured with Stream 1 and Stream 2 enabled at 1920 x 1080 fps. Video Configuration Screen 9.5.1.1 Video Resolutions...
  • Page 85 Configuration and Operation Note: 1. The performance on Streams 2, 3, and 4 depends on the combination and settings of each stream configured before it. For example, Stream 4 performance depends on the settings for Streams 1, 2, and 3. Stream 3 performance depends on the settings for Streams 1 and 2.
  • Page 86 Configuration and Operation 2. From the Resolution drop-down menu, select the desired resolution. A maximum 25/30 frames per seconds is available when selecting WDR 2 Shutter (PAL) or WDR 2 Shutter (NTSC). A maximum 50/60 frames per second is available when selecting 50 fps (PAL) or 60 fps (NTSC). The default setting is 1920 x 1080.
  • Page 87 Configuration and Operation 7. Move the GOV Length slider to a value between 0-4095. The setting determines the frame structure (I-frames and P-frames) for saving bandwidth in a video stream. A longer GOV means decreasing the frequency of I-frames. The default setting is 50. 8.
  • Page 88 Configuration and Operation 3. From the Q Factor drop-down menu, select the desired value. A higher value implies higher bit rates and higher visual quality. The default setting of the MJPEG Q factor is 35. The setting range is from 1 to 70.
  • Page 89 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 1920 x 1080 1280 x 1024 1280 x 720 1024 x 768 800 x 600 1920 x 1080 720 x 576 (PAL) 720 x 480 (NTSC) 640 x 480 352 x 288 (PAL) 352 x 240 (NTSC) 320 x 240 1920 x 1080...
  • Page 90 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 1920 x 1080 1280 x 1024 1280 x 720 800 x 600 720 x 576 (PAL) 1280 x 720 720 x 480 (NTSC) 640 x 480 352 x 288 (PAL) 352 x 240 (NTSC) 320 x 240 (25/30 fps) 1920 x 1080...
  • Page 91 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 1920 x 1080 1280 x 1024 1024 x 768 800 x 600 720 x 576 (PAL) 800 x 600 720 x 480 (NTSC) 640 x 480 352 x 288 (PAL) 352 x 240 (NTSC) 320 x 240 1920 x 1080...
  • Page 92 Configuration and Operation 9.5.1.1.5 Triple-Stream From the Resolution drop-down menu, select the desired resolution. Maximum 25/30 frames per seconds is available when selecting WDR 2 Shutter (PAL) or WDR 2 Shutter (NTSC). Maximum 50/60 frames per second is available when selecting 50 fps (PAL) or 60 fps (NTSC). The default setting is 1920 x 1080. Note: The default bit rate for Stream 1 and Stream 2 is 4096 bps.
  • Page 93 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 Stream 3 1920 x 1080 1280 x 1024 1280 x 720 800 x 600 720 x 576 (PAL) 1280 x 720 1920x1080 - 320x240 720 x 480 (NTSC) 640 x 480 352 x 288 (PAL) 352 x 240 (NTSC)
  • Page 94 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 Stream 3 1920 x 1080 1280 x 1024 1024 x 768 800 x 600 720 x 576 (PAL) 720 x 576 (PAL) 1920x1080 - 320x240 720 x 480 (NTSC) 720 x 480 (NTSC) 640 x 480 352 x 288 (PAL)
  • Page 95 Configuration and Operation 9.5.1.1.6 Quad-Stream From the Resolution drop-down menu, select the desired resolution. A maximum 25/30 frames per seconds (PAL/NTSC) is available when selecting WDR 2 Shutter (PAL) or WDR 2 Shutter (NTSC). A maximum 50/60 frames per second (PAL/NTSC) is available when selecting 50 fps (PAL) or 60 fps (NTSC).
  • Page 96 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 Stream 3 Stream 4 1920 x 1080 1280 x 1024 1280 x 720 1024 x 768 800 x 600 1280 x 720 1920x1080 - 320x240 1920x1080 - 320x240 720 x 576 (PAL) 720 x 480 (NTSC) 640 x 480...
  • Page 97 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 Stream 3 Stream 4 1920 x 1080 1280 x 1024 1280 x 720 1024 x 768 800 x 600 800 x 600 1920x1080 - 320x240 1920x1080 - 320x240 720 x 576 (PAL) 720 x 480 (NTSC) 640 x 480...
  • Page 98 Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 Stream 3 Stream 4 1920 x 1080 1280 x 1024 1280 x 720 1024 x 768 800 x 600 640 x 480 1920x1080 - 320x240 1920x1080 - 320x240 720 x 576 (PAL) 720 x 480 (NTSC) 640 x 480...

  • Page 99: Video Rotation

    Configuration and Operation H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG + H.265/H.264/MJPEG Stream 1 Stream 2 Stream 3 Stream 4 1920 x 1080 1280 x 1024 1280 x 720 1024 x 768 800 x 600 320 x 240 1920x1080 - 320x240 1920x1080 - 320x240 720 x 576 (PAL) 720 x 480 (NTSC) 640 x 480...

  • Page 100: Video Text Overlay

    Configuration and Operation Image after Reversal From the Rotate Type drop-down menu, select 0, 90, 180, or 270 (degrees). · 0 – The image does not rotate. · 90 – The image rotates 90° clockwise (to the right). · 180 – The image rotates 180° counter-clockwise (to the left). ·...

  • Page 101: Video Ocx Protocol

    Configuration and Operation · Include Zoom Ratio checkbox is selected, the selected zoom is displayed in the overlay. Click SET when finished. Text Overlay Setting · Text Overlay Color · Text Overlay Size Click SET when finished. Image Overlay Setting ·...

  • Page 102: Audio

    Configuration and Operation The screen includes the following settings: · RTP over UDP · RTP over RTSP (TCP) · RTSP over HTTP · MJPEG over HTTP · Multicast mode – For Stream 1,2,3, and 4 (where applicable), enter the following details: Video Address, Port, and TTL.

  • Page 103: Camera Tab

    Configuration and Operation Server Gain Setting Set the audio input/output gain levels for sound amplification. The sound will be turned off if the input or output gain is set to Mute. · The audio input gain is adjustable from 1-10. The default setting is 3. ·...

  • Page 104: Exposure Screen

    Configuration and Operation 9.6.1 Exposure Screen The Exposure screen is used to configure lens settings and exposure modes. The exposure is the amount of light received by the image sensor and is determined by the amount of exposure by the sensor (shutter speed), and other exposure parameters.
  • Page 105 Configuration and Operation 9.6.1.1 Auto Iris Mode Auto Iris mode sets a fixed exposure while other parameters can change. In the Exposure section, configure the following setting: · Min Shutter Speed – Select a suitable shutter speed according to the environmental luminance. The following table displays the options: Auto Iris Min Shutter Speed...
  • Page 106 Configuration and Operation The following table lists the options: P-Iris Priority Min Shutter Speed NTSC 1/25 1/30 1/12 1/15 1/1.5 9.6.1.3 Iris Priority Mode In this mode, the iris value is fixed, while gain and shutter speed vary automatically accordingly. The following settings are available: ·...

  • Page 107: Manual Mode

    Configuration and Operation In the Exposure section, configure the following settings: · Min Shutter Speed – Select a suitable shutter speed according to the environmental luminance. The following table displays the options: Auto Shutter Min Shutter Speed NTSC NTSC 1/425 1/500 1/50 1/60...
  • Page 108 Configuration and Operation Similarly, utilizing gain and increasing its level increases the sensitivity of the image sensor, which brightens the image and add details. This increases the level of noise in the image. In Manual Mode, the administrator can select a fixed shutter speed and gain from drop-down menus. The smaller the shutter speed number (the higher the shutter speed), the lower the exposure level.

  • Page 109: Picture Adjustment

    Configuration and Operation 9.6.2 Picture Adjustment Adjustment of some qualities of the video is made possible by selecting Picture Adjustment in the Camera tab. Brightness, Sharpness, Contrast, Saturation and Hue may all be adjusted via drop-down menus from this window, as shown below. Picture Adjustment Screen Brightness You can adjust the image’s brightness by adjusting this parameter.

  • Page 110: Advanced Picture Settings

    Configuration and Operation 9.6.3 Advanced Picture Settings The Advanced Picture Settings screen is used configuring the following settings: White Balance Backlight WDR Function Noise Reduction Settings Compensation Advanced Picture Settings Screen with Backlight Compensation 9.6.3.1 White Balance A camera needs to find a reference color temperature as a way of measuring the quality of a light source for calculating all other colors.

  • Page 111: Backlight Compensation

    Configuration and Operation 9.6.3.2 Backlight Compensation Backlight compensation is used in images where a bright light source is behind the subject of interest. Without backlight compensation, the subject would normally appear in silhouette. The backlight function of the camera allows it to adjust the exposure of the entire image to properly expose the subject in the foreground.

  • Page 112: Ir Function

    Configuration and Operation 3DNR 3DNR (3D Noise Reduction) provides superior noise reduction and is recommended for use in in extra low- light conditions. It is especially useful for reducing blur with moving objects. The 3DNR function reduces image noise/snow in low-light conditions by comparing adjacent frames. A higher level of 3DNR generates relatively enhanced noise reduction, although it creates more motion blur than 2DNR on moving objects.

  • Page 113: Misc. Screen

    Configuration and Operation · Light Sensor – IR LEDs are turned on or off depending on the light sensor. · Light On – Activates IR mode (puts camera into monochrome/Night mode). The IR LEDs are continuously illuminated. · Light Off – Deactivates IR mode (puts camera into color/Day mode). The IR LEDs are continuously off.
  • Page 114 Configuration and Operation Note: After changing the TV Setting, the camera resets automatically. Refresh the page to view the new setting. There is no need to log in again. Digital Zoom The camera’s digital zoom is adjustable from x1 to x30. Select Off or On. The default setting is Off. The setting is applied automatically.

  • Page 115: Ptz Tab

    Configuration and Operation True WDR On True WDR Off PTZ Tab The following functions are available from the PTZ tab Preset Pattern Auto Pan Sequence Home Tilt Range Privacy Mask PTZ Setting RS485 Every screen in the PTZ section includes the following pushbuttons next to the Live View window: PTZ Pushbuttons Zoom Click the Wide or Tele Zoom button to implement continuous...

  • Page 116: Preset

    Configuration and Operation 9.7.1 Preset The PTZ tab opens on the Preset screen. Preset Screen On this screen you can program up to 256 Presets to target a specific view in the Live View pane. To program a Preset Point 1.

  • Page 117: Auto Pan

    Configuration and Operation To move the camera along a Pattern Line 1. Under Pattern run, select the desired Pattern path from the drop-down menu. 2. Click RUN. The camera moves along the recorded Pattern path. To view the camera in full screen mode as it follows the Pattern Line 1.

  • Page 118: Sequence

    Configuration and Operation 9.7.4 Sequence The Sequence page enables you to define up to eight Sequence lines for the camera image. A Sequence line is an automated series of camera movements from one Preset Point to another, in a pre-determined order, and for configurable time periods.

  • Page 119: Home

    Configuration and Operation To run the camera through a Sequence line 1. From the Sequence run section, select the Sequence line from the drop-down list. 2. Click GO. The camera moves through each Preset Point sequentially as programmed. To view the camera in full screen 1.

  • Page 120: Privacy Mask

    Configuration and Operation 9.7.7 Privacy Mask From the Privacy Mask page, you can set up to 20 privacy masks. The Privacy Mask function allows concealment of sensitive portions of the camera image to avoid intrusive monitoring. Note: 1. The Flip function on the PTZ Setting screen is automatically disabled when the Privacy Mask function is on.

  • Page 121: Ptz Setting

    Configuration and Operation 9.7.8 PTZ Setting The PTZ Setting screen includes a few miscellaneous settings. PTZ Setting Screen Flip You can track an object continuously when it passes under the camera by selecting M.E. (Mechanical) or Image (Digital Flip) mode from the drop-down list. When Flip is enabled, the image is reversed along its horizontal axis.

  • Page 122: Rs485

    Configuration and Operation 9.7.9 RS485 The RS485 screen is used for configuring RS-485 connection settings. RS485 Screen To configure RS-485 settings 1. From the Protocol drop-down menu, select PelcoD or PelcoP. The default is PelcoD. 2. From the Baudrate drop-down menu, select the desired baud rate. The default is 2400. 3.

  • Page 123: Appendices

    Appendices 10 Appendices · Technical Specifications · Internet Security Settings · Install UPnP Components · Installing and Deleting the Web Player · Deleting Temporary Internet Files · Connecting Leads to a Spring Clamp Terminal Block · Camera and Mounting Accessories CP-6302 User and Installation Guide September 7, 2017...

  • Page 124: Technical Specifications

    Appendices 10.1 Technical Specifications Camera Image Sensor 1/2.8” Sony Progressive Scan CMOS Sensor Shutter Speed (Automatic Electronic 1/1 to 1/10,000 seconds Shutter) 0.02 lux in color mode, 0.005 lux in night mode with IR Illuminator Sensitivity on @ F1.6, measured with DSS off at 30 IRE Lens Focal Length 4.3-129mm...
  • Page 125 Appendices Operation Auto Iris/P-Iris Priority/Iris Priority/Auto Shutter/Shutter Priority/ Exposure Manual Iris Control 0-9, Full open (P-Iris Priority, Iris Priority, and Manual modes) Maximum Gain Off, 1-3 Digital Slow Shutter (DSS) NTSC: 1-30 fps/PAL: 1/1.5-25 fps Gain Control Off, 1-9 White Balance Auto/ATW/One Push/Manual Digital Zoom 1~10x variable...
  • Page 126 Appendices PTZ Operation Manual Speed 0.1° ~ 90°/second (Pan); 0.1° ~ 60°/second (Tilt) Pan Travel 360° continuous Tilt Travel -20° ~ 200° Presets Preset Accuracy Pan: 0.16°/Tilt: 0.18° Preset Speed 5° ~ 280°/second Maximum Pan-Tilt Speed 280° Sequence Auto Pan Pattern (Cruise) Proportional Pan &...
  • Page 127 Appendices Mechanical Dimensions (with sunshield) Ø 207.43 x 300.39mm (Ø 8.2 x11.8 inches) Weight 3.8 kg (8.4 lbs.) RS-485 Protocols PelcoD and PelcoP BNC (1V p-p, 75Ω); RJ45; 2-pin, 3-pin and 14-pin terminal block Connectors connectors Ingress Protection IP66 Vandal Resistant Rating IK10 Electrical Power Source...

  • Page 128: Internet Security Settings

    Appendices 10.2 Internet Security Settings If ActiveX control installation is blocked, either set Internet security level to default or change ActiveX controls and plug-in settings. To set the default Internet security level 1. Start Internet Explorer (IE). 2. From the Command Bar toolbar, select Tools and select Internet Options from the menu that appears.
  • Page 129 Appendices ActiveX Controls and Plug-in Settings To create a custom level 1. Start Internet Explorer (IE). 2. From the Command Bar toolbar, select Tools and select Internet Options from the menu that appears. Command Bar Toolbar – Internet Options 3. In the Internet Options window that appears, select the Security tab. 4.

  • Page 130: Install Upnp Components

    Appendices 10.3 Install UPnP Components Follow the instructions below to enable UPnP so that the camera can be discovered and displayed in the Network and Sharing Center. To enable UPnP discovery 1. Click (Start) and select Control Panel. 2. Click Network and Internet (Win 7, 8, or 8.1). 3.
  • Page 131 Appendices 6. Click Save Changes. Note: Network discovery requires that the DNS Client, Function Discovery Resource Publication, SSDP Discovery, and UPnP Device Host services are started, that network discovery is allowed to communicate through Windows Firewall, and that other firewalls are not interfering with network discovery.

  • Page 132: Installing And Deleting The Web Player

    Appendices 10.4 Installing and Deleting the Web Player The Quasar Player enables you to view the camera’s user interface. After logging into the unit, the following information bar is displayed: "Run Quasar Player" Information Bar Click Allow. If the Quasar Player has been loaded previously, the Live View window opens. If this is a first-time installation of the camera, the Quasar Player installation wizard opens after accessing the camera.
  • Page 133 Appendices 3. From the list of installed programs, select DVPlayer or DCViewer. 4. Do one of the following: a. On the banner bar, click Uninstall (Win 7, 8, or 8.1). b. Right-click the program, click Uninstall/Change (Win 10). 5. When prompted to confirm the Uninstall, click Yes. 6.

  • Page 134: Connecting Leads To A Spring Clamp Terminal Block

    Appendices 10.5 Connecting Leads to a Spring Clamp Terminal Block The unit is delivered with 2-pin, 3-pin, and 14-pin terminal block connectors. The connectors enable you to connect wires for either the relay output or alarm input and then connect them to the unit. To connect a wire to the spring clamp terminal block 1.

  • Page 135: Deleting Temporary Internet Files

    Appendices 10.6 Deleting Temporary Internet Files To improve browser performance, it is recommended to clean up all of the temporary Internet files. To delete temporary Internet files 1. In Internet Explorer (IE), from the Command Bar toolbar, click Tools and select Internet Options from the menu that appears.

  • Page 136: Camera And Mounting Accessories

    Appendices 10.7 Camera and Mounting Accessories The following mounting accessories are available from FLIR for installation of your Quasar CP-6302 IR PTZ Camera. For more information on available options, contact your FLIR sales representative or contact FLIR Support to request details on where to get the accessories you need.
  • Page 137 Appendices Part Number Item Threaded Wall Mount** CX-ARMX-31 Includes CM-CAPX-31 Pendant Mount. **Requires 1-1/2" threaded male pipe and 3/4" female EMT conduit. Compact Wall Mount* CX-ARMX-0 Dimensions: 184 × 104 × 115.2mm (7.24 × 4.09 × 4.54 in.) Weight: 0.6 kg (1.2 lbs.) Supplied with rubber washer-8 x1, pendant tube washer x1, spring washer-8 x1 and M8x12 screw x1.
  • Page 138 Appendices Part Number Item NTP Adapter CM-F150-62 1-1/2" inner-thread 1/4 turn adapter. Adapts CX-ARMX-1, CX-ARMX-31, and CM-CAPX-31 for use with CX-POLE-0. Part Number Item CX-PIPE-0 Straight Tube (25cm/9.8”) Material: Constructed from iron Length: 250/500mm (9.8/19.7 in.) CX-PIPE-1 Diameter: 50mm (2 in.) (50cm/19.7”) Weight: 1 kg (2.2 lbs.)/1.8 kg (4 lbs.) Supplied with M8x12 screw x1, spring washer-8 x1, pendent tube washer x1,...
  • Page 139 Appendices Part Number Item CX-SWAN-0 Swan Tube For mounting with Swan Tube Color: White Material: Constructed from iron Dimensions: 835 x 300mm (32.9 × 11.8 in.) Diameter: 45mm (1.8 in.) Weight: 3.8 kg (8.4 lbs.) Supplied with pendent tube washer x1, rubber washer-8 x1, waterproof rubber x1, spring washer-8 x1 and M8x12 screw x1 Part Number Item...
  • Page 140 Appendices Part Number Item Pole Thin Direct Mounting CX-POLE-0 Dimensions: 232 × 136 × 60mm/9.1 × 5.4 × 2.4 in. (L x W x D) Diameter: 112 ~ 130 mm (4.4 ~ 5 inches) Weight: 0.7 kg (1.6 lbs.) Supplied with stainless steel straps x4, M8x16 screw x4, washer x4 and spring washer-8 x4.
  • Page 141 Appendices Part Number Item Corner Wide Box Mounting CX-CNBX-0 Dimensions: 232 × 234 × 210mm/9.1 × 9.2 × 8.3 in. (L x W x D) Weight: 2.7 kg (6 lbs.) Supplied with M8x16 screw x4, washer-8 x4, and spring washer-8 x4 Part Number Item CX-PLBX-0...
  • Page 142 6769 Hollister Ave. Goleta, CA 93117 PH: +1 805.964.9797 PH: +1 877.773.3547 (Sales) PH: +1 888.747.3547 (Support) FX: +1 805.685.2711 w w w .flir.com/security Corporate Headquarters FLIR Systems, Inc. 27700 SW Parkw ay Ave. Wilsonville, OR 97070 PH: +1 503.498.3547 FX: +1 503.498.3153...

This manual is also suitable for:

Cp-6302

Table of Contents