Table of Contents
Advertisement
Document Scope and Purpose
Warning:
·
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
·
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at strong light, such as the sun or an incandescent lamp, which
·
can seriously damage the camera.
·
Make sure that the surface of the sensor is not exposed to a laser beam, which could burn out
the sensor.
If the camera will be fixed to a ceiling, verify that the ceiling can support more than 23 newtons
·
(23-N) of gravity, or over three times the camera's weight.
The camera should be packed in its original packing if it is reshipped.
·
Caution:
To avoid damage from overheating or unit failure, assure that there is sufficient temperature regulation to
support the unit's requirements (cooling/heating). Operating temperature should be kept within the range
indicated in the Technical Specifications section.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de l'unité, assurez-vous que la régulation
de température est suffisante pour répondre aux exigences de l'unité (refroidissement/chauffage). La
température de fonctionnement doit être maintenue dans l'intervalle indiqué dans la section Spécifications
Techniques.
4
CP-3211/CP-4221 User and Installation Guide
September 12, 2016
Advertisement
Table of Contents
