Table of Contents
Advertisement
3DNR
3DNR (3D Noise Reduction) provides superior noise reduction and is recommended for use in in extra low-
light conditions. It is especially useful for reducing blur with moving objects. The 3DNR function reduces
image noise/snow in low-light conditions by comparing adjacent frames. A higher level of 3DNR generates
relatively enhanced noise reduction, although it creates more motion blur than 2DNR on moving objects.
Select On or Off. Click Set to confirm the setting
OSD
Enable the OSD (On-Screen Display) function to display the camera tilt, angle, and zoom ratio settings in
the Live View pane. Select On or Off. Click Set to save the setting.
Set Pan Zero
Set the current camera position as the Pan Zero (due north) point for the camera. Click Set to save the
setting.
TV System
The camera supports multi-exposure WDR (True WDR), which is implemented by using a combination of
slow- and fast-exposure shutters. The camera uses an algorithm to determine the optimal mix of regions
within the scene from the two shutters in order to adjust the wide dynamic range of the scene. True WDR
is recommended for most lighting conditions and is enabled by default.
From the drop-down list, select the video format that matches your TV system and the type of WDR you
prefer:
§
WDR 30 fps (NTSC) – Enables the use of True WDR on an NTSC TV system
§
WDR 25 fps (PAL) – Enables the use of True WDR on a PAL TV system
§
Normal 30 fps (NTSC) – Enables the use of digital WDR on an NTSC TV system
§
Normal 25 fps (PAL) – Enables the use of digital WDR on a PAL TV system
Click Set to confirm the setting.
Zoom
Select Wide or Tele. Then drag the cursor on the Zoom bar to set the zoom level, which is displayed in the
window (x1..x30).
Focus
Select one of the following settings: Auto, Manual, Near, or Far.
September 12, 2016
.
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
131
Advertisement
Table of Contents
