Table of Contents
Advertisement
Within the Live View pane on the Motion Detection screen, there is a frame (Motion Detection window)
which is used for defining the motion detection area and indicating motion detection. The motion detection
window is enabled by default. To change the size of the Motion Detection window, move the mouse
cursor to the edge of the frame and drag it outward or inward. Moving the mouse to the center of the frame
shifts the frame to the intended location.
It is possible to define up to four motion detection zones within the Motion Detection window by selecting
a number from the drop-down menu.
The motion detection function may be turned on or off in the Motion Detection section of the screen. The
default setting is Off. Alternatively, you may select By schedule to set a schedule.
To set a schedule
1. Select By schedule. The message Please Select is displayed.
2. Click Please select. A drop-down menu opens.
3. From the drop-down menu, select a schedule from 1 to 10. The selected schedules are displayed in
a horizontal field above the drop-down menu.
For instructions how to set a schedule for motion detection, refer to Schedule. Below is a screen showing
the Schedule drop-down menu with selected schedules.
Motion Detection Windows
Up to 10 Motion Detection windows can be set. One motion detection window is enabled by default. Click
the Add button under the Live View pane to add a Motion Detection window. To cancel a Motion
Detection window, move the mouse cursor to the selected window and click Delete.
September 12, 2016
Motion Detection Screen – with Schedule Drop-Down Menu
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
83
Advertisement
Table of Contents
