Table of Contents
Advertisement
8 Adjusting and Framing-Up the
Camera View
After the camera is connected to the network and running, it is necessary to frame-up the scene and adjust
the camera settings to optimize the picture for the individual scenes. If Latitude is being used, consider
scheduling different settings for changing ambient conditions throughout the day, week, month or seasons.
To adjust and frame-up the camera view
1. In the DNA application, click DNA.
2. In the Discovery list, click to select the camera.
3. Right-click the context menu and select Web, or enter the camera's IP address in your browser's
URL address bar.
4. When the browser connects to the camera and prompts for login, do the following:
a. Log in using the default user name Admin and password 1234. If the password has previously been
changed, use the new password.
Note:
Both the user name and password are case sensitive.
b. Allow the ActiveX to download and choose to install the Quasar Web Player.
c. After the unit's web interface opens, use the function buttons on the Home page to adjust the zoom or
focus.
Tip:
To view greater image detail for more accurate high-definition focusing, on the web-based Viewer
home page, right-click the image, click Full Screen, and check the focus.
Note:
Best focusing results can be achieved when the lens iris is fully open (such as at night in low light).
This prevents loss of sharpness if light levels are reduced at night.
September 12, 2016
CP-3211/CP-4221 User and Installation Guide
Adjusting and Framing-Up the Camera View
53
Advertisement
Table of Contents
