Table of Contents
Advertisement
To set up Sequence Line
1. In the Sequence setting section, click Edit. The Sequence Set screen opens.
2. Select a Sequence line number from the Sequence line drop-down list.
3. Define each Preset Point for the Sequence line in the desired order:
a. Select the first Preset Point from the Preset Name list. Use the PrePage or NextPage buttons to
navigate between the Sequence preset numbers.
b. Specify the Dwell time (between 0 and 127 seconds) for the first Preset Point.
c. Specify the camera's Speed (between 0 and 14).
4. Repeat steps a, b, and c for up to 64 Preset Points.
5. Click Save to save your preset sequence.
To run the camera through a Sequence line
1. From the Sequence run section, select the Sequence line from the drop-down list.
2. Click Go. The camera moves through each Preset Point sequentially as programmed.
To view the camera in full screen
1. Move the cursor onto the Live View pane.
2. Right-click and select Full screen.
3. Double-click to exit Full screen mode.
To stop running a Sequence line
1. Move the cursor to the Live View pane and move the camera in any direction.
September 12, 2016
Sequence Set Screen
CP-3211/CP-4221 User and Installation Guide
Configuration and Operation
115
Advertisement
Table of Contents
