Table of Contents
Advertisement
Configuration and Operation
To add a new user
1. Type the new user name and password in the respective fields.
2. Select the appropriate check boxes to give the user Camera Control, Talk and Listen permissions.
I/O access – Basic functions that enable you to view video when accessing to the camera.
·
Camera control – Allows you to change camera parameters on the Camera tab.
·
Talk – Talk allows the user at the local site to talk from the remote site to the administrator
·
Listen – Listen allows the user at the local site to listen from the remote site to the
·
administrator.
3. Click Add.
Manage User
To delete a user, click the User name drop-down list and select the user. Click Delete to remove
·
the user.
To edit a user, click the User name drop-down list and select the user. Click Edit to edit the user's
·
password and privileges.
Note:
You must enter the user password and also select the authorized function(s).
Click Save to modify the account credentials and privileges, or Close to discard changes.
·
Streaming Authentication Setting
From the drop-down list, select one of the following options:
Disable – Do not use streaming authentication (default setting).
·
·
Basic – A form of authentication that uses unencrypted base64 encoding. Basic Authentication
should generally only be used where transport layer security, such as HTTPS, is provided.
Digest – A form of authentication used over RTSP in which credentials are encrypted when
·
transmitted.
Click Save.
9.3.2.2
HTTPS
To use HTTPS on the camera, an HTTPS certificate must be installed. The HTTPS certificate can be
obtained either by creating and sending a certificate request to a Certificate Authority (CA) or by creating a
self-signed HTTPS certificate as described below.
64
Edit User Account Dialog Box
CP-3211/CP-4221 User and Installation Guide
September 12, 2016
Advertisement
Table of Contents
