Installation
Component
4
Direct mounting bracket
5
Sun shield
6
Camera body
7
Access cover
3.4.1 System Cable
The camera's built-in system cable includes an RJ-45 Ethernet jack, and five (2) two-wire leads that
provide audio input and output, alarm input and output, and external power supply connections. The
cable includes an LED that flashes green to indicate power on and network activity.
1 Black
2 Black
Yellow
Purple
3
Red
Brown
3.4.2 Internal Interfaces
To access the camera's default and reset buttons, along with the camera's microSD card slot, remove
the access cover by loosening two screws.
CB-640x Installation and User Guide Revision 100
To install the camera directly on a wall or ceiling, without using the
attached adapter plate and supplied back box. For more information,
see
Detaching the Camera from the Adapter
Minimizes the effects of rain and sunlight on image quality.
With sun shield attached
Provides access to the camera's
Figure 8: System Cable
Connector
RJ-45
12 VDC/24 VAC -
AUDIO IN+
AUDIO OUT+
ALARM IN Signal
ALARM OUT Signal Blue
This document does not contain any export-controlled information.
Description
Internal
Interfaces.
Red
12 VDC/24 VAC+
Orange
AUDIO IN-
Green
AUDIO OUT-
Black
ALARM IN GND
ALARM OUT COM
February 2021
Plate.
12