Setting The Power Save Timer; Cleaning Your Machine - Canon imageCLASS MP390 User Manual

Hide thumbs Also See for imageCLASS MP390:
Table of Contents

Advertisement

Setting the Power Save Timer

Power Save mode is the mode in which the scanning lamp is extinguished. You can specify the
length of time until the machine enters the Power Save mode by using the Power Save Timer
setting. If you perform an operation immediately after recovering from Power Save mode, the
image may not be correctly read by the machine. If you use the machine frequently, we recommend
that you set the Power Save Timer to <4 HOURS> or <8 HOURS>.
IMPORTANT
• After recovering from Power Save mode, wait at least one minute before scanning, copying, or sending
faxes.
• The default setting is <1 HOUR>.
Follow this procedure:
1
Press [Additional Functions].
2
Use [ ] or [ ] to select <10.POWER SAVE TIMER>.
• The menu number may differ, depending on the country where you purchased this machine.
USER DATA
10.POWER SAVE TIMER
3
Press [OK].
Ex:
POWER SAVE TIMER
4
Use [ ] or [ ] to select the time to switch the machine to Power Save
mode.
– <1 HOUR>:
– <4 HOURS>:
– <8 HOURS>:
5
Press [OK].

Cleaning your machine

This section describes the necessary cleaning procedures for your machine.
CAUTION
• Be sure to turn OFF the power and disconnect the power cord before cleaning the machine.
• If you turn the machine OFF, all the documents stored in memory are deleted. Print all the necessary
documents stored in memory before turning the machine OFF.
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the
components or generate static charges. Use a soft cloth to avoid scratching the components.
• Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean
the machine; these can damage the machine's components.
134
Maintenance
1 HOUR
Switches the machine to Power Save mode if any key on the operation panel
is not pressed for one hour.
Switches the machine to Power Save mode if any key on the operation panel
is not pressed for four hours.
Switches the machine to Power Save mode if any key on the operation panel
is not pressed for eight hours.
Chapter 13

Advertisement

Table of Contents
loading

Table of Contents