Configuring Port Security With Enervista Software; Commands - GE MULTILINK ML2400 Instruction Manual

Ethernet communications switch
Hide thumbs Also See for MULTILINK ML2400:
Table of Contents

Advertisement

ACCESS CONSIDERATIONS
6.3

Configuring Port Security with EnerVista Software

6.3.1

Commands

6–12
After enabling the EnerVista Secure Web Management software,
Select the Configuration > Port > Security menu item to configure
port security as shown below.
From the menu shown above, each individual port can be configured for the proper action
on the port, auto learn MAC addresses and specify individual MAC addresses.
To edit each port, click on the edit icon (
To enable or disable port security, use the Status drop down menu
as shown below.
Note that the screen also provides an overview of each port on the switch. Each port can
be individually configured for the proper port security action.
Each individual port can be configured by clicking on the edit icon (
screen is shown, the following actions can be taken for each port:
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CHAPTER 6: ACCESS CONSIDERATIONS
).
). Once the edit

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MULTILINK ML2400 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF