Code 11 Set Length 2 - Wasp WDI4600 Product Reference Manual

Code 11

Code 11 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 16
setting this feature.
Table 16. Code 11 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC1.2
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 11 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Code 11 Length
Mode, or the second fixed length if in
page 217 for detailed instructions on
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Control. Length 2 is the
Fixed Length
50 Characters
'5' and 0'
149