•
•
The reader supports the following 2D symbologies (barcode types). Symbology-dependent
options for each symbology are included in this chapter. See
page 79 for configuration of 1D barcodes.
•
•
•
•
•
2D Global Features
The following features are common to all, or in some cases, most of the available 2D
symbologies. Default settings are indicated at each feature/option with a green arrow. Also
reference
factory settings. That section also provides space to record any custom settings needed or
implemented for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING barcode at the top of applicable program-
2. Scan the correct barcode to set the desired programming feature or parameter. You may
3. If additional input parameters are needed, go to
Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING
barcode to exit Programming Mode.
Product Reference Guide
2D SYMBOLOGIES
2D Maximum Decoding Time, page
172
2D Structured Append, page 173
Aztec Code, page 174
China Sensible Code, page 177
Data Matrix, page 180
Maxicode, page 183
PDF417, page 186
Appendix B, Standard Defaults
ming pages.
need to cover unused barcodes on the page, and possibly the facing page, to ensure that
the reader reads only the barcode you intend to scan.
appropriate characters from the keypad.
Additional information about many features can be found in the "Refer-
ences" chapter.
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the begin-
ning.
2D Global Features
•
2D Normal/Inverse Symbol Control,
page 173
"1D Code Selection"
2D Symbologies
•
Micro PDF417, page 189
•
QR Code, page 192
•
Micro QR Code, page 195
•
UCC Composite, page 198
•
Postal Code Selection, page 200
for a listing of the most widely used set of standard
Appendix D,
starting on
Keypad, and scan the
171